Laserfiche WebLink
AMIL <br />UST SYSTEM PRINTSET INFORMATION <br />i. <br />1e, <br />-.Four complete sets of plans (To include specification sheets and/or equipment brochures if not on file). <br />O <br />2, <br />Plans drawn to scale in non -erasable print. <br />3. <br />Plot plan to show location and ember of tanks. <br />4. <br />Tank cross-sectional, diagram included on prints submitted <br />5, <br />1/ <br />Detail of tank, piping system, excavation and cover. <br />6. <br />�® <br />Tank(s) and piping approved by a nationally recognized independent testing organization. [Title 23, Subchapter 16, <br />erxeS <br />erxes <br />Article 3, Sec. 2631 (r) b 26351 <br />7. <br />r1Cs <br />Verification of product compatibility with the tank(s), piping, monitoring <br />ben- <br />_%*0' <br />device(s), epoxy or silicone glues, etc. [Section 2635 (b) (2)I <br />8. <br />1 i^ DIMS <br />Manufacturer's written installation instructions for tank(s), piping, monitoring devices, etc. [Section 2635 (b) (5)) <br />9. <br />Tightness Test (NFPA 30) is required on both primary (10) and secondary (20) containment systems before covering. <br />ago <br />[Section 2635 (b) (6) b (7)I <br />10. <br />_® <br />Double walled tanks using pressure or vacuum testing to monitor the annular space. [Section 2635 (b) (7)) <br />11. <br />1/ <br />NFPA 329 "Precision Test" required upon completion of installation with tank in operating condition. Test results to <br />the testing company or owner of facility. [Health b Safety Code, Division 20, <br />be submitted directly to PNS/END from <br />Chapter 6.7, Section 25291 (g)I <br />12. TANK COMPOSITION <br />TANK !! <br /># <br />CAPACITY Gallons <br />0 000 <br />0 000 <br />10 000 <br />10,000 <br />�® <br />MANUFACTURER <br />erxeS <br />erxes <br />Xerxes <br />Xerxes <br />r1Cs <br />ben- <br />> er- <br />F"ber- <br />Fiber- <br />1 i^ DIMS <br />COMPOSITION9 <br />ago <br />MODEL <br />��ll <br />PRODUCT aSOline <br />Unl <br />e Unl <br />SLapgr Un <br />Mid- rad <br />CORROSION PROTECTION <br />/A <br />IA <br />N/A <br />N/A <br />Ll I <br />U.L- LISTED <br />ES <br />ES <br />YES <br />YES <br />ye <br />I <br />COMPATIBILITY WITH 100% <br />E5 <br />YES <br />-ES <br />.i S <br />METHANOL <br />ES <br />13. TANK(s) TO BE INSTALLED <br />_ A. Steel -clad with fiberglass reinforced plastic. <br />S. Holiday test required immediately before "setting" tank(s) (35,000 - 40,000 volts). (Section 2635 (b) (4)) <br />C. Fiberglass (Sections 2635 (3) and 2631 (p)) <br />(1) Striker plate dimensions and materials. <br />(2) Striker plate under all accessible openings. <br />(3) Installation instructions require an air test and soap bubble test prior to installation. <br />_ D. Non -clad steel tank [Section 2635 (b)) <br />_ (1) Cathodic protection provided for entire tank, piping and components (nuts, bolts, washers <br />etc.). <br />_ (2) Approved by a corrosion engineer or N.A.C.E. technician. <br />(3) eDocument stating inspection method and frequency (minimum semi-annual inspection requirement; <br />'e�' <br />4 Rev A- <br />