Laserfiche WebLink
Monog equipment to be installed <br />• Manufacturer: <br />Model Number: <br />Sensor Type: Vapor <br />Sensor/Panel specifications. <br />fe- <br />Location(s) for sensors: <br />Tank: <br />_ Liquid Both. <br />Piping: <br />Dispenser: <br />C. Monitoring and response plan submitted [Section 2632 (d) (1) & (2)]. <br />15. // Any special accessories, fittings, coatings, or linings not inherent within the initial design of the 10 tank or double-wall <br />UST. [Section 2631 (b)] <br />A. Approved by a nationally recognized independent testing organization. <br />B. Demonstration of integrity with the primary and/or secondary containment. <br />16. Tanks subject to floatation. [Section 2635 (a) (7)] <br />A. Anchored by deadman or slab. <br />B. Anchors to be installed as specified by manufacturer. <br />C. Installation details provided on plans. <br />D. Calculations provided. <br />17. SPILL AND OVERFILL PREVENTION <br />Underground storage tank equipped with spill container and an overfill prevention system. (detail drawing of spill <br />container(s)/piping sump(s) required, including tank fill and all openings). <br />A. Spill container [Section 2635 (b) (1)]. <br />If made of metal, exterior wall protected from galvanic corrosion. <br />Capacity: (minimum of five gallons) <br />Equipped with a drain valve which allows drainage of spill into primary container. <br />Manufacturer: <br />B. Overfill prevention system does not allow for manual override and meets one of the following requirements: <br />(1) Alert transfer operator at 90% full by restricting the flow into the tank or triggering an audible and <br />visual alarm [Section 2635(b)(2)(A)] . <br />Manufacturer: Model: <br />(2) Restrict delivery flow to the tank 30 minutes before overfill when tank is filled at no more than 95% <br />capacity and activates an audible alarm at least five minutes before overfill [Section 2635(b)(2)(B)]. <br />Manufacturer: Model: <br />(3) Provide positive shut off at no more than 95% capacity [Section 2635 (b) (2) (C)]. <br />Manufacturer: Model: <br />(4) Provide positive shut-off of flow to the tank so that the fittings on top of the tank are not exposed to <br />the product overfilling [Section 2635 (b) (2) (D)]. <br />7 <br />