Laserfiche WebLink
11 <br />• <br />4. What is the nominal diam ter of a pipeline that can be tested with this system? <br />( ) 1 in. or Iess <br />(I) between 1 and 3 in. <br />(X) between 3 and 6 in. Contact manufacturer for application to lines greater am 3 in. <br />( ) between 6 and 10 in. <br />( ) other <br />S. The system can be used on pipelines pressurized to 30 psi. <br />The safe maximum operating pressure for this system is 60 psi. <br />6. Does the system conduct a test while a mechanical line leak detector is in place in the <br />pipeline? <br />() yes ( no <br />General Features of the System <br />7. What type of test is the system conducting? (Check all applicable responses.) <br />( ) 0.1 gal/h Line Tightness Test <br />(X} 0.2 gal/h Monthly Monitoring Test <br />(X) 3 gal/h Hourly Test <br />8. Is the system permanently installed on the pipeline? <br />(X? yes ( ) no <br />Does the system test the line automatically? <br />( yes ( ) no <br />If a leak is declared, what does the system do? (Check all applicable responses.) <br />(X) displays or prints a message <br />(X) triggers an alarm <br />(X) alerts the operator <br />(� shuts down the dispensing system <br />9. What quantity or quantities are measured by the system? (Please list.) <br />_pressure (osi) and time <br />10. Does the system use a preset threshold that is automatically activated or that automatically <br />turns on an alarm? <br />yes (If yes, skip question 11.) <br />no (If no, answer question 11.) <br />11. Does the system measure and report the quantity? <br />no <br />Description ,, Detection System Page 2 of 5 <br />