Laserfiche WebLink
Overfill Alarm/Ack Switch Installation Guide Mounting Instructions <br />3" (76.2 mm) <br />0.313" (8 mm) dia. <br />2" (50.8 mm) <br />TEST button <br />4 holes <br />(on side) <br />ACKNOWLEDGE <br />0 <br />Hinge <br />side <br />1 <br />conduit <br />RESET <br />6.75" <br />connector <br />C) <br />(171.5 mm) <br />T <br />1.4" <br />(35.6 mm) <br />I <br />1" (25.4 mm) <br />2" (50.8 mm <br />mmolWackmaps <br />4.3" (109.5 mm) <br />Figure 2. Acknowledgement Switch mounting dimensions <br />Mounting Instructions <br />OVERFILL ALARM <br />1. Select a mounting Dation where the Overfill Alarm can be seen and heard clearly from the area where the fuel tanks <br />are filled. In addition, consider the ease of routing interconnection conduit. <br />2. Locate and mark mounting holes using the hole pattern in Figure 1. <br />3. Mount the Overfill Alarm using the four mounting tabs on the housing. <br />Z 10171 k# 11041714 11 dqTffif*U <br />1. Select a mounting location where the Acknowledgement Switch can be easily activated by the tank trick driver. In <br />addition, consider the ease of routing interconnection conduit. <br />2. Locate and mark mounting holes using the hole pattern in Figure 2. <br />3. Mount the Acknowledgement Switch using the four mounting tabs on the housing. <br />4. Install conduit between the Acknowledgement Switch, Overfill Alarm, and 'FLS Console. <br />4 <br />