Laserfiche WebLink
i <br />IMPORTANT! Wire used for this installation must have a temperature rating of at least 90°C. be either 14 or 16 AWG, <br />and be color coded. Splicing alarm power with TLS Console power will cause improper operation of the monitor. <br />Wiring Overfill Alarm with Acknowledgement Switch <br />1. Pull two wires from the switch to the Overfill Alarm. <br />2. Pull two wires for line and neutral from the switch to the power panel. <br />3. Pull one wire from the switch to the TLS Console for connection to the alarm relay. <br />4. Pull one wire for line from the alarm relay in the TLS Console to the power panel. <br />5. Turn power Off and connect wiring according to the wiring diagram in Figure 3 and Table 1. <br />utre <br />® ®M <br />® �N <br />Overfill Alarm <br />(cover open) <br />----------------------- <br />Horn Time <br />Delay Relay <br />--------------------------- <br />i !--------------- -- Ack Switch ' <br />(cover open) <br />To Console Relay - <br />See Console Connection <br />® M <br />Table in this manual ® a <br />®•� <br />Customer supplied <br />junction box------------------------------------- <br />console\—Kwlr.eps N L <br />---------------------------- <br />To power panel <br />Figure 3. Overfill Alarm/Acknowledgement Switch wiring connections <br />A <br />