COMPLIANCE INFO_2018 - Laserfiche WebLink

Home Browse Search

— CT 2 3 2018 ENVIRONMENTAL HEALTH T In-Tank Setup Progra r ' T,Thresh®hi Programmable Minimum t r Threshold If necessary,p ess'SfiEf'until you see the message T1:(Product Label) WATER MINIMUM:0.000 Note:This message does not appear when Float Type has been set to Custom. When there is not water in the tank,but the water height measurement is not 0.0,the water float is resting on a layer of debris on-the bottom of the tank.The Water Minimum Threshold sets the level. To enter the Water Minimum Threshold,press CHANGE and enter the required threshold within the range of 0.0 to 1.0 inches.For example,you enter 0.800.. Press ENTER to confirm the entry.The display will confirm your entry with the message: WATER MINIMUM:0.800 PRESS<STEP>TO CONTINUE Max or Label Val If necessary..press STEP until you see the message: T1:(Product Label) Max OR LABEL VOL:000000 Maximum or Label Volume(in international installations this is considered safe working capacity)alarm warns when the level of fluid in the tank exceeds the volume you enter here.Set this value at a level higher than the High Level Limit[see Figure 7-11. Press CHANGE and enter the value. Press ENTER to confirm your entry.The system displays: MAX OR LABEL VOL:XXXXXX PRESS<STEP>TO CONTINUE Overfill Limit If necessary,press STEP until you see the message: Ti:(Product Label) OVERFILL LIMIT:00 Overfill Limit warns of a potential overfill only during a bulk delivery.When the volume reaches this limit,the system can activate an on-site overfill alarm and trigger a printout showing the tank ,date,time,and product.Set this percentage no greater than 90%of the tank's capacity(in international installations set this percentage no greater than 9910 of label volume)see Figure 7-1. Press CHANGE. Enter the percent limit and press ENTER to confirm your entry: OVERFILL LIMIT:XX9® PRESS<STEP>TO CONTINUE 7-16