COMPLIANCE INFO_2003-2005 - Laserfiche WebLink

Home Browse Search

This manual covers the installation procedures for RED THREAD® IIA product and secondary containment pipe and fittings. Part One details installation proce- dures for 2", 3" and 4" (50, 75 and 100mm) diameter primary product piping. Part Two covers installation proce- dures for 3", 4", 5" and 6"11' (75, 100, 125 and 150mm) diameter second- ary containment piping. Part Three describes the installation procedures for our 100% telescoping containment piping. �. . :.... IMPORTANT NOTE ON ULC LISTING At the time of printing, tests were ongoing with Underwriters' Laboratories of Canada (ULC) to expand the products covered. Please specify "ULC" when inquiring or ordering. Note Options for Adhesives In addition to the primary, secondary and telescoping pipe and fittings, the following adhesives are listed by Underwriters Laboratories Inc. (UL): •DS -7000 series adhesives for: primary systems -petroleum only secondary containment systems -petroleum, alcohols and alcohol/gasoline blends *DS -8000 series adhesives for: primary & secondary containment systems -petroleum, alcohols and alcohol/gasoline blends. • DS -4000 series adhesives for: primary systems only -petroleum, alcohols and alcohol/gasoline blends It is the policy of Smith Fiberglass Products to improve its products continually. In accordance with that policy, the right is reserved to make changes in specifications, descriptions and illustrative material contained in this manual as conditions 011 warrant. The information contained herein is general in nature and is not intended to express any warranty of any type whatsoever nor shall any be implied. (150mm) secondary containment piping is not UL Listed. SAFETY This safety alert symbol indicates an important safety message. When you see this symbol, be alert to the possibility of personal injury. As this pipe may carry hazardous material and/or operate at a hazardous pressure level, you must follow the instructions in this manual to avoid serious personal injury or property damage. In addition, installers should read and follow all cautions and warnings on adhesive kits, chemical heat packs, etc. to avoid personal injury. Observe general safety practices with all saws, tools and other equipment to`avoid personal injury. Wear protective clothing when necessary. Make sure work areas are clean, stable, and properly vented. PAY PARTICULAR ATTENTION TO PART ONE, SECTION 7, ON TESTING.