Laserfiche WebLink
low <br /> PRODUCT PIPING SUMP TESTING <br /> Test Method By: 0 Manufacturer • Industry Standard o Professional Engr o Other(see below) <br /> Test Method Uses: G Pressure 0 Vacuum • Hydrostatic o Other(see below) <br /> Measuring Equipment Used: INCON TS-STS (Electronic Sump Test System) <br /> Description Tank#1 Tank#2 <br /> Tank product Gasoline-87 Gasoline-91 _ <br /> Sump material FRP FRP <br /> Sump diameter (inches) 48" 48" <br /> Sump depth (inches) 53" 56" <br /> Height from tank top to highest 21" 22" <br /> piping penetration (inches) <br /> Height from tank top to lowest 17' 18" <br /> electrical penetration (inches) <br /> Method of sump attachment to tank Tank Collar Tank Collar <br /> Condition of sump prior to testing Dry Dry <br /> Portion of sump tested Entire Entire _ <br /> Is system programmed for fail-safe operation? Unknown Unknown _ <br /> Was fail-safe verified to be operational? No No <br /> Was sensor removed for testing? Yes Yes <br /> Was sensor properly replaced after testing? Yes Yes <br /> Depth of water level from tank top (inches) 24 25 <br /> Wait time for water level to stabilize (hr:min) 0:25 0:14 <br /> Test start time 10:45 AM 10:45 AM <br /> Initial Probe Reading 3.4904 5.0607 <br /> Test end time 11:00 AM 11:00 AM <br /> Final Probe Reading 3.4901 5.0606 <br /> Test duration (hr:min) 0:15 0:15 <br /> Change in water level (±0.0000 inches) -0.0003 -0.0001 <br /> Pass/Fail threshold (±0.0020 inches/}Hr.) 0.0020 0.0020 <br /> TEST RESULT PASS PASS <br /> Comments: <br /> © 2004 Walton Engineering,Inc. <br />