COMPLIANCE INFO_2003-2012 - Laserfiche WebLink

Home Browse Search

r SWRCB, January 2002 Page of 9. FILL RISER CONTAINMENT SUMP TESTING Facility is Not Equipped With Fill Riser Containment Sumps Fill Riser Containment Sumps are Present, but were Not Tested Test Method Developed By: ❑ Sump Manufacturer ❑ Industry Standard X Professional Engineer ❑ Other (Spec) Test Method Used: ❑ Pressure ❑ Vacuum X Hydrostatic ❑ Other (Specify) Test Equipment Used: Caldwell Level Change Indicator Equipment Resolution: .002 Fill Sump #1 Fill Sump #2 Fill Sump #3 Fill Sump # Sump Diameter: 42" 42" 42" Sump Depth: 71" 72" 67" Height from Tank Top to Top of Highest Piping Penetration: 21" 23" 19" Height from Tank Top to Lowest Electrical Penetration: 49" 49" 50" Condition of sump prior to testing: Dry Dry Dry Portion of Sum Tested Water Level 23" Water Level 25" Water Level 21" Sump Material: Fiberglass Fiberglass Fiberglass Wait time between applying water and starting test: 5 Minutes 5 Minutes 5 Minutes Test Start Time: 9:15 10:00 10:05 Initial Reading (RI): .001 .001 .001 Test End Time: 9:45 10:30 10:35 Final Reading (RF): .001 .001 .001 Test Duration: 30 Minutes 30 Minutes 30 Minutes Change in Reading (RF -RI): 0 0 0 Pass/Fail Threshold or Criteria: .005/30Minutes .005/30Minutes .005/30Minutes Test Result: XPass - ❑ Fail X Pass ❑ Fail X Pass ❑ Fail ❑ Pass ❑ Fail- Is there a sensor in the sump? X Yes No X Yes No X Yes No ❑ Yes ❑ No Does the sensor alarm when either product or water is detected? X Yes ❑ No NA X Yes ❑ No NA X Yes []No NA ❑ Yes ❑ No [INA Was sensor removed for testing? X Yes []No NA X Yes ❑ No NA X Yes ❑ No NA ❑ Yes ❑ No ❑ NA Was sensor properly replaced and verified functional after testing? X Yes ❑ No NA X Yes ❑ No NA X Yes ❑ No NA ❑ Yes ❑ No ❑ NA Comments — (include information on repairs made prior to testing, and recommended follow-up for failed tests)