COMPLIANCE INFO_1985-2006 - Laserfiche WebLink

Home Browse Search

SWRCB,January 2002 Page of 6. PIPING SUMP TESTING Test Method Developed By: Sump Manufacturer Industry Standard Professional Engineer Other(Specify)SWCRB Test Method Used: Pressure Vacuum Hydrostatic Other(Specify) Test Equipment Used:Incon Sump Testing Monitor System Equipment Resolution: Sump#dsl pip Sump# Sump# Sump# Sump Diameter: 42" Sump Depth: 28" Sump Material: Fiberglass Height from Tank Top to Top of 16„ Highest Piping Penetration: Height from Tank Top to Lowest 6„ Electrical Penetration: Condition of sump prior to testing: Clean Clean Clean Clean Portion of Sump Tested' See comments Bottom Bottom Bottom Does turbine shut down when sump sensor detects liquid(both Yes No INA Yes No I NA Yes No I NA Yes No NA roduct and water)?* Turbine shutdown response time N/A N/A N/A N/A Is system programmed for fail-safe Yes No NA Yes No NA Yes No NA Yes No NA shutdown?* Was fail-safe verified to be Yes No NA Yes No NA Yes No NA Yes No NA operational?* Wait time between applying pressure/vacuum/water and starting 60 Minutes 60 Minutes 60 Minutes 60 Minutes test: Test Start Time: See comments Initial Reading(RI): See comments Test End Time: See comments Final Reading(RF): See comments Test Duration. See comments 15 Minutes 15 Minutes 15 Minutes Change in Reading(RF-RI): See comments Pass/Fail Threshold or Criteria: +/-0.002 In. +/-0.002 In. +/-0.002 In. +/-0.002 A , *0000 W- Was sensor removed for testing? X Yes No NA X Yes No NA X Yes No NA Yes No NA Was sensor properly replaced and X Yes No X Yes No NA X Yes No NA Yes No NA verified functional after testing? NA Comments—(include information on repairs made prior to testing, and recommended follow-up for failed tests) Bad boot on secondary line visual failure 'If the entire depth of the sump is not tested,specify how much was tested. If the answer to any of the questions indicated with an asterisk(*)is"NO"or"NA",the entire sump must be tested. (See SWRCB LG-160)