COMPLIANCE INFO_2006-2008 - Laserfiche WebLink

Home Browse Search

SWRCB,January 2002 Page 4 of 4 6.PIPING SUMP TESTING Test Method Developed by ❑ Sump Manufacturer ® Industry Standard ❑ Professional Engineer ❑ Other(Specify) Test Method Used ❑ Pressure ❑ Vacuum ® Hydrostatic ❑ Other(Specify) Test Equipment Used:INCON TS-STS UNIT Equipment Resolution:0.006 Sump#Supply Sump#Return Sump# Sump# #CAK482U001 #CAK482U001 Sump Diameter 54 INCHES 54 INCHES Sump Depth 41.5 INCHES 41.4 INCHES Sump Material FIBERGLASS FIBERGLASS Height from Tank Top to Top of 12 INCHES 16 INCHES Highest Piping Penetration Height from Tank Top to Lowest 30 INCHES 26 INCHES Electrical Penetration Condition of sump prior to testing GOOD GOOD Portion of Sump Tested(1) 2"ABOVE PIPING 2"ABOVE PIPING Does turbine shut down when sump sensor detects liquid(both ❑ Yes ❑ No U NA ❑ Yes ❑ No ® NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA product and water)?* Turbine shutdown response time NA NA Is sytem programmed for fail-safe ❑ Yes ❑ No ® NA ❑ Yes ❑ No RNA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA shutdown?* Was fail-safe verified to be ❑ Yes ❑ No N NA ❑ Yes ❑ No U NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA operational?* Wait time between applying pressure/vacuum/water and starting 15 MINUTES 15 MINUTES test Test Start Time 11:53 AM 12:11 PM 1:23 PM 1:45 PM Initial Reading i 4.2733 4.2734 5.6597 5.2493 Test End Time 12:08 PM 12:26 PM 1:38 PM 2:00 PM Final Reading R 4.2732 4.2734 5.6597 5.2493 Test Duration 15 MIN. 15 MIN. 15 MIN. 15 MIN. Change in Reading Rf-Ri -0.0001 0.0000 0.0000 0.0000 Pass/Fail Threshold or Criteria 0.002 0.002 Test Result ® Pass ❑ Fail ® Pass ❑ Fail ❑ Pass ❑ Fail ❑ Pass ❑ Fail Was sensor removed for testing? ® Yes ❑ No ❑ NA ® Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA Was sensor properly replaced and ® Yes ❑ No ❑ NA ® Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA verified functional after testin ? Comments include any information on repairs made prior to testing,and recommended follow-up for failed tests SUPPLY AND RETURN SUMPS#CAK482U001 PASSED THE REQUIRED HYDROSTATIC TESTS.NO REPAIRS ARE NEEDED AT THE PRESENT TIME. (1)If the entire depth of the sump is not tested,specify how much was tested.If the answer to any of the questions indicated with an asterisk(*)is"NO"or"NA",the entire sump must be tested.(See SWRCB LG-160)