Laserfiche WebLink
SWRCB, January 2002 <br />9. FILL RISER CONTAINMENT SUMP TESTING <br />Page of <br />Facility is Not Equipped With Fill Riser Containment Sums ❑ <br />Fill Riser Containment Sumps are Present, but were Not Tested X <br />Test Method Developed By: ❑ Sump Manufacturer ❑ Industry Standard ❑ Professional Engineer <br />❑ Other (Spec) <br />Test Method Used: ❑ Pressure ❑ Vacuum ❑ Hydrostatic <br />❑ Other (Spec) <br />Test Equipment Used: Equipment Resolution: <br />Sump Diameter: <br />Fill Sump # Fill Sump # Fill Sump # <br />Fill Sump # <br />Sump Depth: <br />Height from Tank Top to Top of <br />Highest Piping Penetration: <br />Height from Tank Top to Lowest <br />Electrical Penetration: <br />Condition of sump prior to <br />testing:I <br />4Y' <br />Portion of Sump Tested <br />Sump Material: <br />Wait time between applying <br />water and starting test: <br />AH �' � <br />t 0 2 <br />Test Start Time: <br />Initial Reading (RI): <br />CNVIqQN�IEIlIAL <br />KEALTH <br />Test End Time: <br />'Iz- <br />Final Reading RF): <br />Test Duration: <br />Change in Reading (RF -RI): <br />Pass/Fail Threshold or Criteria: <br />Test Results <br />Is there a sensor in the sump? <br />Does the sensor alarm when <br />either product or water is <br />detected? <br />Was sensor removed for testing? <br />Was sensor properly replaced and <br />verified functional after testing? <br />Comments — (include information on repairs made prior to testing, and recommended follow-up for failed tests) <br />