Laserfiche WebLink
f <br />STEP 6 <br />STEP 7 <br />STEP 8 <br />Apply a bead of Blue Seal Clue along the gasket rim and install <br />the boot onto the seal. Install boot with fill tube at the 12:00 <br />position. Install band clamp to secure the boot to the gasket. <br />Position the insert into the boot if applicable, but do not tighten <br />the clamp. This connection must remain loose through the filling <br />stage to allow air to escape. <br />Fill the boot with either Parasealant 626, or Bostik 1100FS <br />through the fill tube with the Blueline pneumatic dispensing gun <br />until the entire cavity is full. This will ensure that the sealant <br />pushes back through the leak point and stops the leak. <br />STEP 9 Once the boot is full, tighten clamps and allow sealant to fully <br />cure. <br />