COMPLIANCE INFO_1998-2008 - Laserfiche WebLink

Home Browse Search

SWRC8, January 2002 6. PIPING SUMP TESTING Ll Page of Test Method Developed By: Sump Manufacturer ® Industry Standard Professional Engineer Other (Specie) Test Method Used: Pressure Vacuum ® Hydrostatic Other (Spec i)�) Test Equipment Used: INCON Equipment Resolution: .0000 Sump # Sump # Sump # Sump # Sump Diameter: 48" Sump Depth: 381/2" Sump Material: FIBERGLASS Height from Tank Top to Top of Highest Piping Penetration: 17" Height from Tank Top to Lowest Electrical Penetration: 16" Condition of sump prior to testing: OK Portion of Sump Tested' 20" Does turbine shut down when sump sensor detects liquid (both product and water)?* Yes No ® NA Yes No ❑ NA Yes No NA Yes No NA Turbine shutdown response time N/A Is system programmed for fail-safe shutdown?' Yes No ® NA Yes No ❑ NA Yes No NA Yes No NA Was fail-safe verified to be o erational?* Yes No ® NA Yes No ❑ NA Yes No NA Yes No NA Wait time between applying pressure/vacuum/water and starting test: 10 MINUTES Test Start Time: 11:10 / 11:26 Initial Reading (R,): 5.4450 / 5.4449 Test End Time: 11:25 / 11:41 Final Reading (RF): 5.4447 / 5.4447 Test Duration: 15 MINUTES Change in Reading (RF -RI): -.0003 / -.0002 Pass/Fail Threshold or Criteria: .0020 / .0020 Test Result: 0 Pass ❑ Fail ❑ Pass ❑ Fail ❑ Pass ❑ Fail ❑ Pass 0 Fail Was sensor removed for testing? ® Yes No NA ❑ Yes No NA Yes No NA Yes No NA Was sensor properly replaced and verified functional after testin ? ® Yes No NA ❑ Yes No NA Yes No NA Yes No NA Comments — (include information on repairs made prior to testing, and recommended follow-up for failed tests) 1 If the entire depth of the sump is not tested, specify how much was tested. If the answer to any of the questions indicated with an asterisk (*) is "NO" or "NA", the entire sump must be tested. (See SWRCB LG -160)