COMPLIANCE INFO_1998-2008 - Laserfiche WebLink

Home Browse Search

SWRC13, January 2002 8. FILL RISER CONTAINMENT SUMP TESTING Page of Facility is Not Equipped With Fill Riser Containment Sumps Fill Riser Containment Sumps are Present, but were Not Tested Test Method Developed By: Sump Manufacturer ® Industry Standard Professional Engineer Other (Specie) Test Method Used: Pressure Vacuum ® Hydrostatic Other (Spec) Test Equipment Used: INCON Equipment Resolution: .0000 Fill Sump # Fill Sump # Fill Sump # Fill Sump # Sump Diameter: 48" Sump Depth: 38" Height from Tank Top to Top of Highest Piping Penetration: NA Height from Tank Top to Lowest Electrical Penetration: NA Condition of sump prior to testing: OK Portion of Sump Tested 12" Sump Material: FIBERGLASS Wait time between applying pressure/vacuum/water and starting test: 10 MINUTES Test Start Time: 10:14 / 10:31 Initial Reading (Rj): 5.8461 / 5.8462 Test End Time: 10:29 / 10:46 Final Reading (RF): 5.8459 / 5.8468 Test Duration: 15 MINUTES Change in Reading (RF -RI): -.0002 / +.0006 Pass/Fail Threshold or Criteria: .0020 / .0020 Test Result: ® Pass ❑ Fail ❑ Pass ❑ Fail ❑ Pass ❑ Fail ❑ Pass ❑ Fail Is there a sensor in the sump? ® Yes No ❑ Yes No Yes No Yes No Does the sensor alarm when either product or water is detected? ® Yes No NA []Yes No NA Yes No NA Yes No NA Was sensor removed for testing? ® Yes No NA ❑ Yes No NA Yes No NA Yes No NA Was sensor properly replaced and verified functional after testing? ®Yes No NA El Yes No NA Yes No NA Yes No NA Comments — (include information on repairs made prior to testing, and recommended follow-up for failed tests)