COMPLIANCE INFO_2009-2018 - Laserfiche WebLink

Home Browse Search

S W RCB, January 2002 C 8. FILL RISER CONTAINMENT SUMP TESTING Page 5 of 5 Facility is Not Equipped With Fill Riser Containment Sumps ❑ Fill Riser Containment Sumps are Present, but were Not Tested 0 Test Method Developed by ❑ Sump Manufacturer 0 Industry Standard ❑ Professional Engineer ❑ Other (Specify) Test Method Used ❑ Pressure ❑ Vacuum ® Hydrostatic ❑ Other (Specify) T :st Equipment Used: Incon TS -STS Equipment Resolution: .0006 Fill Sump # UE046UO02 Fill Sump # Fill Sump # Flu Sump # Summa Diameter: 44" Sum Depth: 80" i 0iz,ht from Tank Top to Top of I Iighest Piping Penetration: 32" Height from Tank Top to Lowest Electrical Penetration: 31" Condition of sump prior to testing: Good Portion of Sump Tested: 2" above high pen Sump Material: Poly Wait time between applying pressure/vacuum/water and starting test: 15 min Test Start Time: 10:09 am 10:25 am Initial Reading R.i): 3.4926 3.4944 Test End Time: 10:24 am 10:40 am Finai Reading (Rf): 3.4943 3.4943 Test Duration: 15 min 15 min _ W Chane in Reading Rf-Ri : .0017 .0001 Pass/Fail Threshold or Criteria: .002 Test Result: 2 Pass ❑ Fail ❑ Pass ❑ Fall ❑ Paw ❑ Fall ❑ Pass ❑ Fail Is there a sensor in the sump? ® Yes ❑ No ❑ Yes ❑ No ❑ Yes ❑ No ❑ Yes ❑ No Does the sensor alarm when either product or water is detected? [] Yes ® No ❑ NA ❑ Yes ❑ No ❑ NA CJ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA Was sensor removed for testing? ® Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA Was sensor properly replaced and verified functional after testing? ❑ Yes ® No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA and Sensor reinstalled to lowest point but not tested.