COMPLIANCE INFO_2009-2018 - Laserfiche WebLink

Home Browse Search

SWRCB, January 2002 6. PIPING SUMP TESTING v Page 4of5 Test Method Developed by ❑ Sump Manufacturer ® Industry Standard ❑ Professional Engineer ❑ Other (Specify) Test Method Used ❑ Pressure ❑ Vacuum ® Hydrostatic ❑ Other (Specify) Test Equipment Used: Incon TS -STS Equipment Resolution: .0006 Sump # Piping U E046U002 Sump # Sump # Sump # Sump Diameter 44" Sump Depth 56" Sump Material Poly Height from Tank Top to Top of Hi est Piping Penetration 20" 1 lei ght from Tank Top to Lowest Electrical Penetration 15" Condition of w 41p prior to testing Good Portion of Sump Tested (1) 2" above high pen Does turbine shut down when "! Mlp sensor detects liquid (both roduct and water)?* ❑ Yes ❑ No ®NA ❑ Yes ❑ No [INA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA Turbine shutdown response time NA Is sytem programmed for fail-safe shutdown?* ❑ Yes ❑ No 0 NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA Was fail-safe verified to be operational?* ❑ Yes ❑ No ® NA D Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA Wait time between applying pressure/vacuum/water and starting test 30 min Test Start Time 11:29 am 11:46 am Initial Reading Ri 4.0436 4.0438 Test End Time 11:44 am 12:01 pm Final Reading R 4.0438 4.0440 Test Duration 15 min 15 min Chane in Reading Rf-Ri .0002 .0002 Pass/Fail Threshold or Criteria .002 Test Result ® Pass ❑ Fail ❑ Pass ❑ Fall ❑ Pass ❑ Fail ❑ Pass ❑ Fail Was sensor removed for testing? ® Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA Was sensor properly replaced and verified functional after testin 7 © Yes ® No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA Comments include any information on repairs made prior to testing, and recommended follow -u for failed tests Sensor reinstalled to lowest point but not tested. (1) if the entire depth of the sump is not tested, specify how much was tested. If the answer to any of the questions indicated with an asterisk (*) is "NO" or "NA", the entire sump must be tested. (See SWRCB LG -160)