COMPLIANCE INFO_2001-2004 - Laserfiche WebLink

Home Browse Search

The Discharge Head of the FE Petro Submerged Turbine Pump features state-of-the-art engi- neering. It has been designed to provide the ultimate in ease of service and installation. Easy And Efficient This unit features a three com- ponent system for easy service or replacement. The line check valve, extractable head and the junction box can each be serviced individually from the top without disturbing the remaining two parts. Unique Features When manifold tank instal- lations are a factor, a syphon check valve is furnished to assist in automatically main- taining equalized product levels in the tanks. Each unit also features a built-in line pressure monitor port which eliminates the need for an auxiliary adapter housing. The line check valve, with built-in relief valve, protects the dispenser and piping from abnormal pressures. £� .C1 "gllir' This valve, which is indepen- dent of the removable head. is accessible by simply removing two easy -to -reach bolts. By turning the valve clamp screw over the relief valve. air for pressure testing the system can be introduced at any time through an air test opening. Air and vapor are removed from the product through a passage in the discharge head and returned to the tank—below- the product level—through a steel vapor tube. This insures solid, air -free product delivery to the island dispensers. The combination starting and running capacitor is completely contained in the discharge manifold assembly. yet remains separate from the check valve and extractable head. This completely sepa- rates the capacitor housing frorn the fluid passage. A simple two wire circuit eliminates color coding and any worry about crossing wires. A conduit water seal at the outlet of the junction box is provided for the incoming power wires. No electrician is needed to break a connection when the pump and motor unit need to be removed. If at any time you need to remove the pump, all that is required to break the circuit is to simply turn the jack screw. This separates the plLib In j C011IZeC- tion In an L1 / explosion - proof enclosure. Just lift up and swing the wiring yoke out of the way to automatically disconnect the power to the pumping unit.