Laserfiche WebLink
7SWRCB, January 2002 <br />5. SECONDARY PIPE TESTING <br />Page 3 of 7 <br />Test Method Developed By: <br />❑ Piping Manufacturer ® Industry Standard ❑ Professional Engineer <br />❑Other (Specify) <br />Test Method Used: <br />® Pressure <br />❑ Other (Specify) <br />❑ Vacuum <br />❑ Hydrostatic <br />Test Equipment Used: 4.5 GLYCERIN <br />FILLED GAUGE&NITOGEN <br />Equipment Resolution: .5 <br />Piping Material: <br />Piping Run# Fuel <br />Piping Run# Vapor <br />Piping Run# Piping Run# <br />Plastic FRP <br />Piping Manufacturer: <br />Environ <br />Smith <br />Piping Diameter: <br />1.5" <br />3" <br />Length of Piping Run: <br />40' <br />30' <br />Product Stored: <br />Gas <br />Gas <br />Method and location of piping- <br />run isolation: <br />Test Boot Piping Sump <br />Test Boot Fill Sump <br />Wait time between applying <br />pressure/vacuum/water and <br />starting test: <br />15 Minutes <br />15 Minutes <br />Test Start Time: <br />9:15am <br />9:40am <br />Initial Reading (R,): <br />5.2 <br />5.3 <br />Test End Time: <br />10:15am <br />10:40am <br />Final Reading (RF): <br />5.2 <br />5.3 <br />Test Duration: <br />1 Hour <br />1 Hour <br />Change in Reading (RF-Ri): <br />0 <br />0 <br />Pass/Fail Threshold or Criteria: <br />0 <br />0 <br />Test Result: <br />Pass❑ Fail ❑ NIA <br />Z Pass❑ Fail ❑ NIA <br />❑ Pass❑ Fail ❑ N/A ❑ Pass❑ Fail ❑ NIA <br />Comments — (include information on repairs made prior to testing, and recommended follow-up for failed tests) <br />