COMPLIANCE INFO_2005-2018 - Laserfiche WebLink

Home Browse Search

7SWRCB, January 2002 Test Method Developed By: Test Method Used: 6. PIPING SUMP TESTING ❑ Sump Manufacturer ❑ Other (Specify) ❑ Pressure ❑ Other (Specify) Page 4 of 7 Industry Standard ❑ Professional Engineer ❑ vacuum ® Hydrostatic Test Equipment Used: INCON STS I Equipment Resolution: .002 1 Portion of Sump Tested' 2" Above Piping Penetration Does turbine shut down when sump sensor detects liquid (both ❑ Yes ❑ No ® NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA product and water)?* Turbine shutdown response time NA Is system programmed for fail-safe ❑ Yes ❑ No ® NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA shutdown?* Was fail-safe verified to be ❑ Yes ❑ No ® NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA Wait time between applying pressure/vacuum/water and starting test: Test Start Time: Initial Reading ft): Test End Time: Final Reading (RF): Test Duration: Change in Reading (RF-Ri): Pass/Fail Threshold or Criteria: Test Result: Was sensor removed for testing? Was sensor properly replaced and verified functional after testing? 15 Minutes 9:4219:57 6.804016.8045 9:57110:12 6.804416.8052 2-15 Minute Tests .00041.0007 .0021.002 Pass ❑ Fail ® Yes ❑ No ❑ NA ® Yes ❑ No ❑ NA ❑ Pass ❑ Fail ❑ Yes ❑No El NA ❑ Yes ❑No El NA ❑ Pass ❑ Fail ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA Comments — (include information on repairs made prior to testing, and recommended follow-up for failed tests) ❑ Pass ❑ Fail ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ' If the entire depth of the sump is not tested, specify how much was tested. If the answer to any of the questions indicated with an asterisk (*) is "NO" or "NA", the entire sump must be tested. (See SWRCB LG -I60) Sump #1 Sump # Sump # Sump # Sump Diameter: 37" Sump Depth: 46" Sump Material: Fiberglass Height from Tank Top to Top of Highest Piping Penetration: 20" Height from Tank Top to Lowest Electrical Penetration: 2119 Condition of sump prior to testing: Good Portion of Sump Tested' 2" Above Piping Penetration Does turbine shut down when sump sensor detects liquid (both ❑ Yes ❑ No ® NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA product and water)?* Turbine shutdown response time NA Is system programmed for fail-safe ❑ Yes ❑ No ® NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA shutdown?* Was fail-safe verified to be ❑ Yes ❑ No ® NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA Wait time between applying pressure/vacuum/water and starting test: Test Start Time: Initial Reading ft): Test End Time: Final Reading (RF): Test Duration: Change in Reading (RF-Ri): Pass/Fail Threshold or Criteria: Test Result: Was sensor removed for testing? Was sensor properly replaced and verified functional after testing? 15 Minutes 9:4219:57 6.804016.8045 9:57110:12 6.804416.8052 2-15 Minute Tests .00041.0007 .0021.002 Pass ❑ Fail ® Yes ❑ No ❑ NA ® Yes ❑ No ❑ NA ❑ Pass ❑ Fail ❑ Yes ❑No El NA ❑ Yes ❑No El NA ❑ Pass ❑ Fail ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA Comments — (include information on repairs made prior to testing, and recommended follow-up for failed tests) ❑ Pass ❑ Fail ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ' If the entire depth of the sump is not tested, specify how much was tested. If the answer to any of the questions indicated with an asterisk (*) is "NO" or "NA", the entire sump must be tested. (See SWRCB LG -I60)