Laserfiche WebLink
SEE <br />k <br />ENV1R0f\,,,MKENTAL. HEALTH <br />DEPARTMENT <br />IST models can only be powered by a MagVFC- controller: <br />* 2 hp models can operate with single- or three-phase <br />incoming power supply to the MogVFCTm. <br />- 4 hp models require three-phase incoming power <br />supply to the McgVFC"' for proper operation. <br />- Incoming power supply to the MOgVFCTM can be <br />200-250 VAC, 50 or 60 Hz_ <br />- MagVFC'm outputs a three-phase, variable frequency <br />signal, valid for FE Petro variable speed pumps only. <br />- 2 hp max. motor draw: 7 Amps. <br />CeUSUD - 4 hp max. motor draw: 15 Amps, <br />US <br />- MogVFCTm max, line draw: 20 Amps, <br />* 2 hp or 4 hp, variable speed, two-stage centrifugal - Max, liquid viscosity: 70 SSU at 60 OF j 1 OC), <br />type pump motor with integral, automatic, thermal <br />overload protection. * IST models are UL and cUL listed for fuel <br />mixtures containing diesel fuel with up to 20% <br />* Max. pressure: selectable operating pressure on biodiesel, 100% biodiesel, up to 85% ethanol with <br />MogVFCTM between 24 psi and 42 psi deadhead. gasoline, and 20% MTBE, 20% ETBE or 17% TAME <br />* Available with MogShelFm, which results in 45% • with gasoline. <br />increased flow area around motor. IST models can also be used with diesel fuels, fuel oils, <br />kerosene, Avgos and jet fuels in a non -gelled <br />pourable state. <br />• All IST models include variable speed, variable length <br />options and alcohol -gasoline compatibility standard, <br />• Check valve: 23/." diameter fluorocarbon seal <br />constructed on cost aluminum body and aluminum <br />backing washer. <br />• Pressure relief valve: available in four pressure relief <br />settings, integral to check valve. Standard model <br />relieves at 40 psi and resets above 35 psi, <br />* Consult factory for applicable approvals. <br />16 SUBMERSIBLE PUMPING SYSTEMS <br />• All wetted elostomers ore made of a high grade, <br />fluorocarbon compound, <br />- Syphon: venturi-type syphon primer supplied with <br />every submersible. Syphon check valve and <br />secondary syphon sold separately. <br />- Air eliminator: every submersible includes tank return <br />path with one-way check valve to provide active <br />air elimination. <br />- Electrical disconnect: electrical yoke for positive <br />contractor disconnect during service. <br />• Franklin Fueling Systems is on ISO goo I <br />Certified Manufacturer. <br />