Laserfiche WebLink
4NE PUMPS <br />n -u mersi e <br />Turbine Pump Specifications <br />For full diagram see Ordering Guide. <br />- - - - - - - - - - <br />DEPARTME1 -1 <br />111,11, --miim I'll, <br />IST models can only be powered by a MogVFC7 controller: <br />* 2 hp models can operate with single- or three-phase <br />incoming power supply to the MagVFCr". <br />* 4 hp models require three-phase incoming power <br />supply to the MagVFCTm for proper operation. <br />* Incoming power supply to the MagVFC7M can be <br />200-250 VAC, 50 or 60 Hz. <br />* MagVFCTM outputs a three-phase, variable frequency <br />signal, valid for FE Petro variable speed pumps only. <br />* 2 hp max, Motor draw: 7 Amps. <br />COUS LIMID - 4 hp max, motor draw: 15 Amps. <br />* MogVFC-,m max. line draw: 20 Amps. <br />* 2 hp or 4 hp, variable speed, two-stage centrifugol <br />type pump motor with integral, automatic, thermal <br />overload protection. <br />* Max. pressure: selectable operating pressure on <br />MagVFC111 between 24 psi and 42 psi deadhead, <br />* Available with MagShel", which results in 45% <br />increased flow area around motor. <br />• All IST models Include variable speed, variable length <br />options and alcohol -gasoline compatibility standard, <br />• Check valve: 23/4" diameter fluorocarbon seal <br />constructed on cost aluminum body and aluminum <br />backing washer. <br />• Pressure relief valve: available in four pressure relief <br />settings, integral to check valve, Standard model <br />relieves of 40 psi and resets above 35 psi. <br />* Consult factory for applicable approvals. <br />ink Vft.-_ I <br />16 SUBMERSIBLE PUMPING SYSTEMS <br />• IST models are UL and CUL listed for fuel <br />mixtures containing diesel fuel with up to 2o% <br />biodiesel, 100% biodiesel, up to 85% ethanol with <br />gasoline, and 20% MTBE, 20% ETBE or 17% TAME <br />with gasoline. <br />• IST models can also be used with diesel fuels, fuel oils, <br />kerosene, Avgas and jet fuels in a non -gelled <br />pourable state. <br />• Ali wetted elastomers are mode of a high grade, <br />fluorocarbon compound, <br />* Syphon: venturi-type syphon primer supplied with <br />every submersible. Syphon check valve and <br />secondary syphon sold separately, <br />* Air eliminator: every submersible includes tank return <br />path with one-way check valve to provide active <br />air elimination, <br />* Electrical disconnect: electrical yoke for positive <br />contractor disconnect during service. <br />�=e- <br />Franklin Fueling Systems is an ISO 9001 <br />Certified Manufacturer. <br />