Laserfiche WebLink
Anchoring the Pump/Dispenser to the Island Installing Units on the Island <br />111111 pw=§ <br />Note: Pumps do not normally require Shear Valves. The following procedure for a pump is <br />identical to that of a dispenser, except that the Shear Valve may not be used. <br />Improper anchoring of units could cause damage, severe injury, or death resulting from the <br />unit tipping over from the impact or drive -off. <br />NFPA 30A requires the anchoring of pumps/dispensers. <br />Securely install anchor bolts at all anchoring locations as shown on foundation diagrams for <br />safe operation of Shear Valves and hose breakaways. <br />To anchor pumps/dispensers to the island, proceed as follows: <br />1 Verify if the Shear Valves are firmly anchored to the island form (concrete or Pit Box). See <br />Figure 6-8. <br />Note: If the Shear Valve is not anchored properly, it may not operate correctly during a severe <br />impact. Follow the Shear Valve manufacturer's instructions. <br />Figure 6-8: Anchoring Shear Valves using Anchor Brackets <br />Page 52 MDE-3985UEncore®Installation Manual • September 2011 <br />