Laserfiche WebLink
AUG-25-2008, 13:5S Service Station Systems 408 938 8888 P.02 <br /> 0 <br /> IMPORTANT: OPW products should be used in compliance with applicable federal, state, provincial, and local <br /> laws and regulations. Product selection should be based on physical specifications and limitations and <br /> compatibility with the environment and materials to be handled. OPW MAKES NO WARRANTY 01" <br /> FITNESS FOR A PARTICULAR USE. All illustrations and specifications in this literature are based on the <br /> latest product information available at the time of publication. OPW reserves the right to make changes at any <br /> time in prices,materials, specifications and models and to discontinue models without notice or obligation. <br /> C30 I=VW* <br /> OPW 10 Series Emergency Shut-Off Valves(10BF 10BFC 10BFP 10FCP 10SBFP 10SBFCP IORF 10RF111 <br /> 10 SP 10BM 10BMC IORHMP 10BHMCP 10SBHMP JORM 1011 1ORMSP IORAIP 10BU JOBUC <br /> 10BUP 10 UCP 10SHUP 10SBUCP 10RU 10RUS 10 UP JORUSP IOS-4771 I0RW-4735) <br /> OPW 10 Series Emergency Shut-off Valves are installed on fuel supply lines beneath dispensers at grade level <br /> to minimize hazards associated with collision or fire at the dispenser. If the dispenser is pulled over or <br /> dislodged by collision, the top of-the valve breaks off at the integral shear groove,activating poppets and <br /> shutting off the flow of fuel. Single-poppet models shut off supply flow,while double-poppet models shut off <br /> supply as well as prevent release of fuel frorn the dispenser's internal piping. The base of the Emergency Valve <br /> is securely anchored to the concrete dispenser island through a stabilizer bar system within the dispenser sump <br /> or pan to ensure proper shearing action.The valve base is secured to the stabilizer bar using a three-point boss <br /> mount system or with a U-Bolt Kit(not included), I OUBK-01 5 sold separately. Valve inlet(bottom) <br /> connections are female pipe threads and outlet(top)connections are available with female threads, male <br /> threads,or a union fitting. Other options include suction system models with a normally closed secondary <br /> poppet which maintains prime, and models with external threads on the inlet body which connect to secondary <br /> containment systems. <br /> Table of Contents: <br /> 1.Features <br />