COMPLIANCE INFO_2008 - Laserfiche WebLink

Home Browse Search

AUG-25-2008, 13:55 Service Station Systems 408 938 8888 P.04 Features • High Flow Capacity—The primary poppet is held Out,of the flow stream while the secondary poppet is held normally open to minimize head loss across the valve and to protect the poppet seals from damage and erosion.True 1 1/2" and 2" body sizes ensure maximum flow. Fire Protection—A fusible I ink trips the valve closed at 165'F to shut off fuel supply to the dispenser. • Main Poppet Seat Integral to the Top Assembly—Having the main poppet seat as an integral part of' the valve top assures a new,clean seating surface is installed each time the top is replaced. This design also ensures that the integrity of the seal between the valve top and bottom is verified during line testing and allows full inspection of the main poppet when the top is removed. Reliable Shut-off—A Stainless Steel Main Spring, aTeflon-Coated Brass Packing Nut,and a Copper- Nickel-Chrome Plated Brass Stein are designed to prevent tar build-up and corrosion from interfering with poppet operation after long periods of normal service without activation. • Integral Test Port—A 3/811 (9.5 mm)Test Part allows the piping system to be air tested without breaking any piping connections. • Patented Thermal Relief Valve—Relieves excessive pressure build-up caused by thermal expansion of fuel in the dispenser piping system in the event of fire(double-poppet models only). • Low-Profile Tops—Female and Union-top double-poppet valves have a low-profile top to allow upgrading from OPW single-poppet valves without changing existing piping. • Multiple Mounting Options—Valves are boss-mounted to stabilizer bars in sumps and pans or mounted to bars embedded in the island with optional U-Bolt kits I 0LJ13K-01 5 (not included). Versatile Combination Body(boss mount/U-Bolt mount) models are available to accommodate most mounting applications with one valve style. • Underwriters Laboratories—Listed for use with gasoline and 85%and 100%methanol. All OPW 10 Emergency Shut-Off Valves meet requirements of UL STANDARD 842. • Duragard@-Coat Finish—Provides superior corrosion resistance. Materials Top: cast iron Body: cast iron Disc: M-19 Carrier: zinc-plated steel Stem: copper-nickel-chrome plated brass Poppet spring: stainless steel Seal- M-19 O-ring Packing nut: brass,Teflono.?)coated Inlet and outlet thread: 1 1/2" ( 4 cm) NPT(British threads available) *With black Duragarda)coating Notice: As per NFPA 30A,electrical supply to the submersible pump must always be disconnected before servicing meters, dispensers or emergency shut-off valves.