COMPLIANCE INFO_2014-2015 - Laserfiche WebLink

Home Browse Search

Materials OPW 10 Series Top:Cast iron Low Profile Patented Thermal Emergency Shut-Off Body:Cast Iron Relief Valve Valves Disc: M-19Air Test Port Main OPW 10 Series Emergency Shut-off Valves Carrier:Zinc-plated steel Poppet secondary Stem:Copper-nickel-chrome- seat ? Poppet are installed on fuel supply lines beneath plated brass Fusible dispensers at grade level to minimize Poppet spring: Stainless steel Link hazards associated with collision or fire at Seal: M-19 0-Ring Nickel-Plated, the dispenser. If the dispenser is pulled Packing nut:Brass,Teflon-coated Teflon-Coated over or dislodged by collision,the top of Inlet and outlet thread: 1'/z'(4 cm) x Main stem the valve breaks off at the integral shear NPT(British threads available) Combinationactivatin poppets and shutting *With black Duragard®E-Coating �y Main Poppet groove, 9 P PP 9 off the flow of fuel. Single-poppet models Features shut off supply flow,while double-poppet models shut off supply as well as prevent ♦ High Flow Capacity—the primary ♦ Integral Test Port—a W(9.5 mm)test release of fuel from the dispenser's internal poppet is held out of the flow stream port allows the piping system to be piping.The base of the emergency valve is while the secondary poppet is held air-tested without breaking any piping normally open to minimize head loss connections. securely anchored to the concrete dispenser across the valve and to protect the ♦ Patented Thermal Relief Valve— island through a stabilizer bar system within poppet seals from damage and erosion. relieves excessive pressure over 25 psi the dispenser sump or pan to ensure True 1'h"(4 cm)and 2"(5 cm)body caused by thermal expansion of fuel proper shearing action.The valve base is sizes ensure maximum flow. in the dispenser piping system in the ♦ Fire Protection—a fusible link trips the event of fire(double-poppet models only). secured to the stabilizer bar using a t valve closed at 165 F to shut off fuel ♦ Low-Profile Tops—female and point boss mount system or a U-Bolt Kit supply to the dispenser. union-top double-poppet valves have (not included) 10UBK-015(1-1/2") and ♦ Main Poppet Seat Integral to the Top a low-profile top to allow upgrading 10URK-0200(2 sold separately).Valve Assembly—having the main poppet from OPW single-poppet valves without inlet(bottom)connections are female pipe seat as an integral part of the valve top changing existing piping. threads and outlet(top)connections are ensures a new,clean seating surface is ♦ Multiple Mounting Options—valves installed each time the top is replaced. are boss-mounted to stabilizer bars in available with female threads, male threads This design also ensures that the sumps and pans or mounted to bars or a union fitting.Other options include integrity of the seal between the valve embedded in the island with optional suction system models with a normally top and bottom is verified during line U-Bolt kits 10UBK-015(not included). closed secondary poppet which maintains testing and allows full inspection of the Versatile Combination Body(boss prime,and models with external threads on main poppet when the top is removed. mount/1.1-Bolt mount)models are ♦ Duragard®-Coat Finish—provides available to accommodate most mounting the inlet body which connect to secondary superior corrosion resistance. applications with one valve style. O containment systems. ♦ Reliable Shut-off—a stainless steel ♦ Underwriters Laboratories— L main spring,a teflon-coated brass listed for use with gasoline and packing nut and a copper/nickel/ 85%and 100%methanol.All OPW chrome-plated brass stem are designed 10 Emergency Shut-Off Valves meet to prevent tar build-up and corrosion requirements of UL STANDARD 842. from interfering with poppet operation ♦ Compatible with 85%ethanol(E85) after long periods of normal service without activation. PAIS Offset Adaptor -+ Ordering specifications The OPW PA15 Offset Adaptor is Thread size offset Height width designed for adjusting misalignment zj Part Number in. mm in. mm in. mm in. mm of pipe in dispenser sumps and = ` suction stubs.The PA15 has a low PAI 5-10 11h 38.1 1 25 21!4 57.2 35h 92.1 profile feature,and is designed Materials PAI 5-15 1'h 38.1 11/2 38.1 2114 57.2 41h 104.8 for maximum flow. Ductile Iron1 1 s PA15-20 1 h 38.1 2 51 2 h 57.2 4!e 117.5 Zinc Chromate 02il13 OPW F4iit1n0(omPonents 9393 Princeton-Glendale Road+ Hamilton,Ohio USA 45011 +Phone:(800)422-2525 s Fax:(800)421-3297 117