COMPLIANCE INFO_2016-2017 - Laserfiche WebLink

Home Browse Search

SWRCB, January 2002 7. UNDER -DISPENSER CONTAINMENT UDQ TESTING Page 12 of 14 Test Method Developed By: ❑ UDC Manufacturer -A Industry Standard ❑ Professional Engineer ❑ Other (Spec) Test Method Used: ❑ Pressure ❑ Other (Spec) ❑ Vacuum ® Hydrostatic Test Equipment Used: INCO N TS -STS Equipment Resolution: +/-0.002" UDC Manufacturer: UDC # 25 Master Unknown UDC # 25 Satellite Unknown UDC # 26 Master Unknown UDC # 26 Satellite Unknown UDC Material: Fiber lass Fiberglass Fiberglass Fiberglass UDC Depth: 30" 30" 30" 30" Height from UDC Bottom to Top of Highest Piping Penetration: 14" 13" 13" 13" Height from UDC Bottom to Lowest Electrical Penetration: 10" 9" 9" 9" Condition of UDC prior to testing: Dry Dry Dry Dry Portion of UDC Tested 17" 17" 17" 17" Does turbine shut down when UDC sensor detects liquid (both product and water)?` ❑ Yes ❑No 9 NA ❑ Yes ❑ No ® NA ❑ Yes ❑ No 9 NA ❑ Yes ❑ No ® NA Turbine shutdown response time Is system programmed for fail- safe shutdown?` ❑ Yes ❑No ja NA ❑ Yes ❑ No ® NA ❑ Yes ❑ No 9 NA ❑ Yes ❑ No 'X NA Was fail-safe verified to be operational?* ❑ Yes ❑ No KNA ❑ Yes ❑ No X NA ❑ Yes ❑ No JNA ❑ Yes ❑ No ® NA Wait time between applying pressure/vacuum/water and starting test 15min 15min 15min 15min Test Start Time: 5:25pm 3:35pm 3:35pm 4:08pm Initial Reading RI : 3.3416" 3.0203" 3.1708" 2.8615" Test End Time: 5:40pm 3:50pm 3:50pm 4:23pm Final Reading (RF): 3.3412" 3.0201" 3.1704" 2.8611" Test Duration: 15min 15min 15min 15min Chane in Reading RF -RI): 0.0004" 0.0002" 0.0004" 0.0004" Pass/Fail Threshold or Criteria: +/- 0.002" +/- 0.002" +/- 0.002" +/- 0.002" Test Result: ® Pass ❑ Fail N Pass `_ ❑ Fail- 19 Pass ❑ Fail' ® Pass ❑ Fait Was sensor removed for testing? ® Yes ❑No ❑ NA K Yes ❑ No ❑ NA X Yes ❑ No ❑ NA !XJ Yes ❑ No ❑ NA Was sensor properly replaced and verified functional after testin ? Yes ]No :1 NA Yes El No 11 NA Yes 11 No 11 NA XJ Yes ELINo❑ NA Comments — (include information on repairs made prior to testing, and recommended follow-up for failed tests) I ` 1__P't RT M - N ' If the entire depth of the UDC is not tested, specify how much was tested. If the answer to any of the questions indicated with an asterisk (*) is "NO" or "NA", the entire UDC must be tested. (See SWRCB LG -160)