Laserfiche WebLink
iMIT"IMMIMIM. I <br />0 <br />0 <br />MM. IF Tim <br />FXV/FX2V detector RECEIVED <br />p <br />installs in this 2"port <br />Figure 1. FXV Instaillsdon parts in The R*d Jacket <br />3. Examine straight bore below two-mch thread for corrosion roughms& If tound to be rough, smooth with <br />fine emery paper. <br />4. Apply UL-olassilied non-toxic, pipe thread sea4ant to the two-inch three& on the detector, Lubficate o -ring <br />an the leak detedar. <br />5. Screw the leak detector into the pump. Tighten with a wrench Oop hex Is 1- 114 Inch). <br />& Installabon of vent tube and snap tap connectDra. <br />For FX1 V models <br />a. Remove V*Anch pipe plug from tank test port in the Packer (on G -Inch Big -Flo applications, remove <br />the Winch pipe plug from the riser/flarige assembly, for The Red Jacket pumps, see Figure 2). <br />b, Apply a UL -classified non-toxic pipe thread sealant to the threads of the W-iwh NPT straight vent <br />tube fitting and insiall in tank test port of the packer. On 6 -inch Big+lo appicatit ns, the 1/4 -inch NPT <br />straight vent tube fitting may be installed into the riseriflange assembly. <br />c. Apply a UL -classified nOn-t0XiG pipe thread sealant to the threads of the Winch INIP'TMdegree, went <br />tube fitting and instal in the leak detector vent opening in the cap of the leak detector. <br />i': Install Owe vent lubiN into both fillings and lighten per instructiorm on package, <br />