COMPLIANCE INFO_2014-2017 - Laserfiche WebLink

Home Browse Search

8. FILL RISER CONTAINMENT SUMP TESTING Facility is Not Equipped With Fill Riser Containment Sumps ❑ Fill Riser Containment Sumps are Present,but were Not Tested ❑ Test Method Developed By: ❑Sump Manufacturer ®Industry Standard ❑Professional Engineer ❑Other(Spec) Test Method Used: ❑Pressure ❑Vacuum ®Hydrostatic ❑Other(Spec) Test Equipment Used: See attached testing procedures Equipment Resolution: Inches Fill Sump# 87 Fill Sump#91 Fill Sump# Fill Sump# Sump Diameter: 48^ 48" Sump Depth: 79^ 83" Height from Tank Top to Top of Highest Piping Penetration: 10^ 10^ Height from Tank Top to Lowest Electrical Penetration: m 27^ 31^ Condition of sump prior to Fair Fair Fair Fair testing: Portion of Sump Tested Above highest penetration Above highest penetration Above highest penetration Above highest penetration Sump Material: Wait time between applying pressure/vacuum/water and 15 minutes 15 minutes 15 minutes 15 minutes starting test: Test Start Time: 9:56am 9:48am Initial Reading(RI): 12.76101 Inches 3.50518 Inches Inches Inches Test End Time: 10:11 am 10:03am Final Reading(RF : 2.76193 Inches 3.50551 Inches Inches Inches Test Duration: 15 minutes 15 minutes 15 minutes 15 minutes Change in Reading(RF-RI): 0.00092 0.00033 Pass/Fail Threshold or Criteria: 0.002 0.002 0.002 0.002 Test Result: 0 Pass ❑Fail p Pass ❑Fail ❑ Pass ❑Fail ❑ Pass ❑Fail Is there a sensor in the sum ? ®Yes ❑No m Yes ❑No Z Yes ❑No ❑Yes ❑No Does the sensor alarm when either product or water is p Yes ❑No ❑NA p Yes ❑No ❑NA p Yes ❑No ❑NA Z Yes ❑No ❑NA detected? Was sensor removed for testing? ®Yes ❑No ❑NA ®Yes ❑No ❑NA ®Yes ❑No ❑NA ®Yes ❑No ❑NA Was sensor properly replaced and ©Yes ❑No ❑NA p Yes ❑No ❑NA p Yes ❑No ❑NA p Yes ❑No ❑NA verified functional after testin ? Comments—(include information on repairs made prior to testing, and recommended follow-up for failed tests)