Laserfiche WebLink
0 AEGEIVEO <br /> D.Results of Testing/Servicing MAR ®6 2015 <br /> Software Version Installed: 329.01 <br /> LMIRONMENTAt <br /> Complete the following checklist: F <br /> ro Yes r No* Is the audible alarm operational? <br /> e Yes r No* Is the visual alarm operational? <br /> a° Yes r No* Were all sensors visually inspected,functionally tested,and confirmed operational? <br /> s Yes r No* Wereall sensors installed at lowest point of secondary containment and positioned so that other equipment will not interfere with <br /> heir ro er operation? <br /> 170 Yes r No* If alarms are relayed to a remote monitoring station,is all communications equipment(e.g.modem)operational? <br /> N/A <br /> ro Yes r No* For pressurized piping systems,does the turbine automatically shut down if the piping secondary containment monitoring <br /> system detects;a. leak,fails to operate,or is electrically disconnected?If yes:which sensors initiate positive shut-down?(Check <br /> N/A all that apply)P_Sump/Trench Sensors; P Dispenser Containment Sensors. <br /> Did you confirm positive shut-down due to leaks and sensor failure/disconnection? Yes; r No <br /> r. Yes r No* For tank systems that utilize the monitoring system as the primary tank overfill warning device(i.e.no mechanical overfill <br /> prevention valve is installed),is the overfill warning alarm visible and audible at the tank fill point(s)and operating properly?If <br /> o> N/A 'o' <br /> at what percent of tank capacity does the alarm trigger?% <br /> 4 Yes* r No Nas any monitoring equipment replaced?If yes,identify specific sensors,probes,or other equipment replaced and list the <br /> anufacturer name and model for all re lacement parts in Section E below. <br /> Yes* a: No Nas liquid found inside any secondary containment systems designed as dry systems?(Check all that apply) <br /> Product; Water.If yes,describe causes in Section E below. <br /> •' Yes r No* Nas monitoring system set-up reviewed to ensure proper settings?Attach set up reports,if applicable <br /> Yes r No* s all monitoring equipment operational per manufacturer's specifications? <br /> *In Section E below,describe how and when these deficiencies were or will be corrected. <br /> E.Comments: <br /> REPLACED.V.R.BATTERY,REPLACED REG FILL 208 SENSOR WITH A 209 SENSOR.ALL PASSED. <br /> Monitoring System Certification Page 2 of 3 12/07 <br />