COMPLIANCE INFO_2013-2016 - Laserfiche WebLink

Home Browse Search

SWRCB, January 2002 8. Page of FILL RISER CONTAINMENT SUMP TESTING Facility is Not Equipped With Fill Riser Containment Sums ❑ Fill Riser Containment Sumps are Present, but were Not Tested ❑ Test Method Developed By: ❑ Sump Manufacturer ® Industry Standard ❑ Professional Engineer ❑ Other (Spec) Test Method Used: ❑ Pressure ❑ Vacuum ❑ Other (Spec) 9 Hydrostatic Test Equipment Used: Incon Incon TS -STS Tester Equipment Resolution: +/-0.002" MENEEMEMFill Sump Diameter: Sump # 91 36" Fill Sump # Fill Sump # Fill Sump # Sump Depth: 50" Height from Tank Top to Top of Highest Piping Penetration: 12" Height from Tank Top to Lowest Electrical Penetration: 23„ Condition of sump prior to testing: p Dry Portion of Sump Tested 28" Sump Material: Fiberglass Wait time between applying pressure/vacuum/water and starting test: 15 minutes Test Start Time: 11:37am 12:00pm Initial Reading (RI): 5.3059" 5.3059" Test End Time: 111:52am 12:15pm Final Reading (RF): 5.3059" 5.3059" Test Duration: 15 Minutes Each 30 Change in Reading (RF -RI): 0.0000 1 0.0000 Pass/Fail Threshold or Criteria: +/-0.002" +/-0.002" Test Result: N Pass ❑ Fail ❑ Pass ❑ ]Fail ❑ Pass ❑ Fail ❑ Pass ❑ Fail Is there a sensor in the sump? ® Yes ❑ No ❑ Yes ❑ No ❑ Yes ❑ No ❑ Yes ❑ No Does the sensor alarm when either product or water is detected? ® Yes []No ❑ NA ❑ Yes ❑ No ® NA ❑ Yes ❑ No X NA ❑ Yes ❑ No ® NA Was sensor removed for testing? fk Yes []No ❑ NA ❑ Yes ❑ No ® NA ❑ Yes ❑ No 9 NA ❑ Yes ❑ No © NA Was sensor properly replaced and k Yes ❑No ❑ NA verified functional after testin ? ❑ Yes ❑ No ® NA ❑ Yes ❑ No 9 NA ❑ Yes ❑ No ® NA Comments — (include information on repairs made prior to testing, and recommended follow-up for failed tests)