COMPLIANCE INFO_2012-2018 - Laserfiche WebLink

Home Browse Search

SWRCB, January 2002 6. PIPING SUMP TESTING MOM Test Method Developed By: ❑ Sump Manufacturer ® Industry Standard ❑ Professiona , ElOther (Specie) " �l Test Method Used: ❑ Pressure ❑ Vacuum ❑X Hydrostatic ❑ Other (Spec) Test Equipment Used: Incon TS -STS I Equipment Resolution: .0006 Comments — (include information on repairs made prior to testing, and recommended follow-up for failed tests) Sensors were reinstalled at lowest point and not tested. Piping / Fill Sump Visual FAIL due to torn Supply and Return Secondary test boots Piping Transition Sump FAIL possible test boot issues. ' If the entire depth of the sump is not tested, specify how much was tested. If the answer to any of the questions indicated with an asterisk (*) is "NO" or "NA", the entire sump must be tested. (See SWRCB LG -160) Piping UG01 00001 IVent 0001 00001 I Pipe Tran UG01 0001 Sump Diameter: 48.00" 26.00" X 18.00" 28.00" X 28.00" Sump Depth: 60.00" 36.00" 36.00" Sump Material: Fiberglass Fiberglass Fiberglass Height from Tank Top to Top of Highest Piping Penetration: 24.00" 14.00" 14.00" Height from Tank Top to Lowest Electrical Penetration: 18.00" 27.00" 27.00" Condition of sump prior to testing: Good Good Good Portion of Sump Tested' 2" Above Highest Pen 2" Above Highest Pen 2" Above Highest Pen Does turbine shut down when sump sensor detects liquid (both product and water)?" Dyes ❑No ONA ❑ ❑Yes ❑No IXINA ❑NA —]Yes ❑No X ❑Yes ❑No ❑NA Turbine shutdown response time N/A N/A N/A Is system programmed for fail-safe shutdown?` ❑Yes [:]No [H]NA ❑Yes ❑No X NA ❑ ❑Yes X NA ❑No ❑ ❑Yes ❑No ❑NA Was fail-safe verified to be operational?* ❑Yes ❑No ❑X NA ❑Yes ❑No FX ❑Yes ❑No FX ❑Yes [—]No ❑NA Wait time between applying pressure/vacuum/water and starting test: 15 Min. 15 Min. 15 Min. Test Start Time: N/A N/A 9:03 AM 9:22 AM 9:03 AM 9:22 AM Initial Reading (Rj): N/A N/A 5.9235 5.9213 5.9795 6.5323 Test End Time: N/A N/A 9:18 AM 9:37 AM 9:18 AM 9:37 AM Final Reading (RF): N/A N/A 5.9218 5.9200 5.9761 6.3160 Test Duration: N/A N/A 15 Min. 15 Min. 15 Min. 15 Min. Change in Reading (RF -RI): N/A N/A .0017 .0013 .0034 .2163 Pass/Fail Threshold or Criteria: .002 .002 .002 .002 .002 .002 Test Result: ❑ Pass ❑X Fail ❑X Pass ❑ Fail ❑Pass ❑X Fail ❑ Pass ❑Fail Was sensor removed for testing? ❑X Yes ❑No [_]NA [E]Yes ❑No ❑NA ❑X Yes ❑No ❑NA ❑Yes ❑No ❑NA Was sensor properly replaced and verified functional after testing? ❑Yes X❑No ❑NA ❑Yes ONo ❑NA ❑Yes �No ❑NA ❑Yes ❑No ❑NA Comments — (include information on repairs made prior to testing, and recommended follow-up for failed tests) Sensors were reinstalled at lowest point and not tested. Piping / Fill Sump Visual FAIL due to torn Supply and Return Secondary test boots Piping Transition Sump FAIL possible test boot issues. ' If the entire depth of the sump is not tested, specify how much was tested. If the answer to any of the questions indicated with an asterisk (*) is "NO" or "NA", the entire sump must be tested. (See SWRCB LG -160)