Laserfiche WebLink
Safety Data Sheet <br /> Product Name: SMART Grip Filler <br /> Product identifier:SBF1182, SBF1184 <br /> Revision Date: 03-02-2015 <br /> Replaces: <br /> All personnel in the area should be protected as in Section 8. Avoid <br /> breathing vapors. Use an inert absorbent such as sand or <br /> vermiculite. Place in properly labeled closed container. <br /> 7. Handling and storage <br /> Precautions for safe handling: Mildly irritating material.Avoid unnecessary exposure. All hazard <br /> precautions given in the data sheet must be observed. Do not get in <br /> eyes, on skin and clothing Wash hands before eating Use with <br /> adequate ventilation Avoid contact with material, avoid breathing <br /> dusts or fumes, use only in a well ventilated area. Do not take <br /> internally. Keep container closed when not in use. Keep out of the <br /> reach of children. <br /> Conditions for safe storage: Store in a cool dry place. Isolate from incompatible materials. Store <br /> in a cool dry place For maximum product quality, avoid prolonged <br /> storage at temperatures above 75 °F (25 °C). Keep away from heat, <br /> sparks, and flame Store in a tightly closed container Avoid contact <br /> with incompatible materials. <br /> Materials to Avoid/Chemical Peroxides Strong acids Strong oxidizing agents Polymerization <br /> Incompatibility:: catalysts <br /> 8. Exposure controls/personal protection <br /> Limits: <br /> Chemical Component OSHA PEL ACGIH TLV-TWA ACGIH STEL <br /> Talc 20 mppcf 2 mg/m3 <br /> Styrene 100 ppm 20 ppm 40 ppm STEL; 170 mg/m3 <br /> STEL <br /> Glass enamel 5mg/m3 10mg/m3 <br /> Appropriate engineering No exposure limits exist for the constituents of this product. Use <br /> controls.: local exhaust ventilation or other engineering controls to minimize <br /> exposures and maintain operator comfort. General or local <br /> ventilation or isolation may prove adequate to keep airborne <br /> exposures below exposure limits. Explosion proof exhaust <br /> ventilation should be used. <br /> Eye Protection: Wear chemically resistant safety glasses with side shields when <br /> handling this product. Do not wear contact lenses. Splash proof <br /> chemical goggles are recommended to protect against the splash of <br /> product. <br /> Skin Protection: Not normally considered a skin hazard. Where use can result in skin <br /> contact, practice good personal hygiene and wear a barrier cream <br /> Page 5 of 9 <br />