Laserfiche WebLink
Safety Data Sheet <br /> Product Name: SMART Grip Filler <br /> Product identifier:SBF1182, SBF1184 <br /> Revision Date: 03-02-2015 <br /> Replaces: <br /> and/or impervious surgical style gloves. Wash hands and other <br /> exposed areas with mild soap and water before eating, drinking, <br /> and when leaving work. Protective gloves and proper clothing <br /> should be worn to prevent skin contact. Gloves should be made of <br /> neoprene or natural rubber.To prevent repeated or prolonged skin <br /> contact, wear impervious clothing and boots A barrier cream may <br /> be used for additional skin protection. <br /> Respiratory Protection: Respiratory protection may be required to avoid overexposure <br /> when handling this product. General or local exhaust ventilation is <br /> the preferred means of protection. Use a respirator if general room <br /> ventilation is not available or sufficient to eliminate symptoms. Use <br /> a NIOSH approved respirator designed to remove particulate <br /> matter and organic solvent vapors. <br /> Other Protective Equipment: Splash proof chemical goggles are recommended to protect against <br /> the splash of product. Protective gloves and proper clothing should <br /> be worn to prevent skin contact. Gloves should be made of <br /> neoprene or natural rubber.To prevent repeated or prolonged skin <br /> contact, wear impervious clothing and boots A barrier cream may <br /> be used for additional skin protection. <br /> General Hygiene Conditions: All hazard precautions given in the data sheet must be observed. <br /> Do not get in eyes, on skin and clothing Wash hands before eating <br /> Use with adequate ventilation Avoid contact with material, avoid <br /> breathing dusts or fumes, use only in a well ventilated area. Do not <br /> take internally. Keep container closed when not in use. Keep out of <br /> the reach of children. <br /> 9. Physical and chemical properties <br /> Appearance (physical state): Paste <br /> Color: Green Yellow <br /> Odor: Aromatic <br /> Odor threshold: No data available <br /> pH: Neutral <br /> Melting Point/Freezing Point(°C): 23 OF <br /> Initial Boiling Point and Boiling Range (°C): 145 <br /> Flash Point(°C): 37.5 <br /> Evaporation Rate: Slower than Ethyl Ether <br /> Flammability(solid,gas): No data available <br /> Upper Flammable/Explosive Limit: 6.1 <br /> Lower Flammable/Explosive Limit: 1.1 <br /> Vapor Pressure: 5 MMHG@20C/68F <br /> Vapor Density: Heavier than air. Vapors that evolve from this product <br /> will tend to settle and accumulate near the floor. <br /> Relative Density: 1.04 <br /> Solubility(ies): Insoluble <br /> Page 6 of 9 <br />