COMPLIANCE INFO_2019 - Laserfiche WebLink

Home Browse Search

Paints chemicals and their containers Various types of Solvents MAR 0 2 2016 Dirt and water that come in contact with oil or other hazardous materials �� £ ¥ N i Corrosive / toxic materials —batteries and chemicals Metal cuttings —fillings (those by the cutoff saw and hose crimper . ) All spills shall be contained and cleaned up immediately and disposed into the designated hazmat disposal containers . If you should have a question regarding an unknown material being hazardous, immediately ask your supervisor for determination and handling instructions . All hazardous waste must be identified and stored in an approved storage container, sealed , labeled and removed from site within 90 days of an empty hazardous waste storage container coming onto site . Containers shall be sealed immediately after placing hazardous waste in to a container . The only time a container can be left open is when you have multiple containers that need to be emptied . The storage container cannot be left open on a daily basis . If the container gets full prior to the 90 day window of being picked up contact your supervisor and notify him the containers are full so the container can be picked up and a new empty container may be delivered . Waste oil tank needs to be inspected daily and documented , if a leak is found , advise your supervisor immediately and contain the leak appropriately by using onsite spill kits . Any leakage into a Secondary containment area must be cleaned up within 24 hours of noticing leak. All hazardous waste storage containers that contain solids such as grease sweep mixed will oil/grease , dirt mixed with oil/fuel , metal filings, dirt, mud from steam rack, and battery storage shall be inspected weekly and documented . Staff will be designated to perform these inspections . When using the steam rack no water or other material should exit the steam rack area , if you observe liquid approaching the storm drain , turn the steam plant off immediately and use items from the spill kit located in steam rack area , contain the liquid and advise your supervisor Immediately . Any solid material , left over matter from steaming shall be picked up and disposed of immediately . After completing steam job dump said material into an appropriate hazmat container .