** PLEASE CHECK LOOKUP - if good, then Approve QCStatus, else update with correct RECORD_ID

Home Browse Search

Monitoring Each autoclave is equipped with recording devices, which automatically and continuously monitor and record performance and process parameters throughout the autoclave cycle. The autoclave's programmable logic controller is programmed to achieve the prescribed time, temperature and the process is reinitiated through another complete cycle. Through the telecommunication system, San - I -Pak, Inc. is also able to monitor the system from our factory upon your request. Maintenance Maintenance of the autoclaves is performed consistent with the autoclave manufacturer's recommendations, which include the following schedule of maintenance activities and planned frequency. Planned Frequency Month Maintenance Activity Description 3 Examine door seals. Replace if necessary. 6 Check door clearances and operations. Adjust/Lubricate. 3 Check door safety operation. 6 Check and adjust loading/unloading mechanisms and equipment. 3 Check/calibrate temperature and pressure indicators 3 Test safety valves. 3 Check strainers and steam traps. Clean if necessary. 3 Check filters. Clean or replace as required. 3 Check all controls and indicator for proper operation. 3 Check recording devices for proper pull-down. 3 Test vacuum system for proper pull down. 6 Perform vacuum leak test. 3 Run all cycles while recording temperatures and pressures. 3 Check piping for leaks and valves for proper operation. 3 Check manual override for proper operations. 6 Check Battery for memory backup. The procedures are recorded on a data sheet, signed by the performing technician and autoclave -operating supervisor, and maintained in a logbook. Training Factory training includes the following: 1. Classroom instructions on: a. The types of waste that may and may not be autoclaved.