Laserfiche WebLink
external contamination (see Attachment I for visual instructions on <br /> packaging RMW). If issues are encountered, please refer to Attachment II <br /> for issue resolution. <br /> 6. After packing the RMW container has been completed, staff must tie the <br /> biohazard bag lining the RMW container and secure the top of the container <br /> (see Attachment I for visual instructions). The top must be closed <br /> completely. The exterior must be examined for visible contamination and <br /> disinfected if contamination is found. Finally, staff must confirm that the <br /> container is labeled or marked according to regulations. <br /> 7. A contractor's label will be attached to the side of the RMW container <br /> (see Attachment I for example of contractor's label). The date is recorded <br /> on the contractor's label. The sealed container is transported to the RMW <br /> holding area to await pickup by the RMW contractor. <br /> 8. Supplies (biohazard containers, plastic biohazard liners, labels etc.) shall <br /> be routinely restocked by the contractor at the time of waste pickup. If <br /> additional usage is anticipated, staff is responsible to notify the vendor in <br /> advance so the appropriate supplies can be delivered. <br /> C. Procedure for Sharps Disposal <br /> 1 . Do not use the sharps container as storage container. Use only for intended <br /> purpose to discard contaminated sharps. <br /> 2. Sharps containers shall be provided in each work area where sharps (i.e. <br /> phlebotomy needles, finger stick lancets, glass test tubes or other sharps) <br /> are utilized, including donor, laboratory and sample management areas. <br /> 3. Containers shall be made from rigid plastic, be puncture-resistant, leak- <br /> proof, and marked with the biohazard symbol. <br /> 4. Each container shall be placed in an easily accessible area of the <br /> workstation. <br /> 5. All containers must remain in an upright position. <br /> 6. Sharps containers may only be filled 3/4 full or to the fill line if one is <br /> provided on the container. <br /> 7. All containers must be closed before removing them from the work area. <br /> American Red Cross Biomedical Services Safety Page 9 of 17 <br /> Regulated Medical Waste Program Program#023 <br />