|
NOT FOPPRESOAKING (REMSE WHILE STILL WET)
<br />1. .. �.. • �; r +. r i♦ r >.
<br />DO NOT DILUTE ELM
<br />— Stir Before Use BW&
<br />—
<br />If Frozen, Completely Easy f t0 useThaw First Y
<br />1. Spray, 2. Remove; 3. Lock Down
<br />or Removing A.C.
<br />(Asbestos Containing Mate
<br />EvennWets
<br />Amosite!
<br />Patent Pending U.S. & Fg
<br />A111 appol, Mob, a
<br />PLEASE READ
<br />ImpuniAnT F1 A 9 HE
<br />• Contains no volatile solvents: Organic/vapor respirator not required •
<br />APPLICATION PROCEDURE: PRECAUTIONS:
<br />• READ BWE brochure or contact a factory representative • Keep O and all chemicals out of the reach of childr
<br />for complete application instructions. • Slippery when wet
<br />• Surfaces must be clean and free of grease. • May become sharp and abrasive when dry.
<br />•
<br />Irritation may occur If protective clothing is improperly worn.
<br />• WEAR chemical goggles and rubber gloves when applying • Eye Irritant: If sprayed into eyes, flush with water.
<br />BWE 5000. TAPE overall sleeves closed, TAPE rubber • Do not mix with other types of chemicals.
<br />gloves closed to sleeves. Use in accordance with NIOSH/ • Close container after each use.
<br />EPA/OSHA/STATE regulations. • Clean up with water prior to drying. JIM
<br />• RESPIRATOR: When used in asbestos environment, • Read all instructions and directions before using BWE IRWIN
<br />•. Donot take Internally. Contains aqueous alkali silicate. (PH 1 P1
<br />in accordance with NIOSH/EPA/OSHA/STATE regulations.
<br />.. TECHNICAL SPECIFICATIONS:
<br />PRODUCT WARRANTY
<br />BETTER WORKING ENVIRONMENTS, INC. guarantees their products to be free of
<br />defects. Since the use of, and the application of Better Wonting Environments is
<br />beyond our control, we agree only to replace or refund the purchase price of.any Better
<br />Working Environments product found by our laboratory to be defective. However, we
<br />assume no reaPonsiWNty or liability beyond the purchaw trice of our Products. No other
<br />warranties, express or Implied, are given.
<br />No agent employee, distributor or ottwr naps Illative of Better waking Environ
<br />Inc. has the authority to change or extend this axnd@lon of wee. Therefore. them an no
<br />other warranties, either express or fniplied, whlctn extend beyond that Set forth
<br />NO - None Detected
<br />Corrosiveness
<br />(HUD/FHA UM -80, para 9.8) N
<br />Odor Emission
<br />(HUD/FHA UM -80, para 9.11) Norm
<br />Color (ASTM 01500) ...... Colorbm
<br />Weight per Galion
<br />(ASTM 01298) ........ 10.42
<br />Surface Tension .... 30.7 Dynes/crt
<br />Viscosity. cps (ASTM 0445) ...... 3&C
<br />Specific Gravity ...............:
<br />Total Solids (Gravimetno ..... 29
<br />Solvents (Gas chromotography) ... Wate1
<br />Eye Irritation ................. Irritanl
<br />(16 CFR.CtL 11, Part 1500.42)1:7
<br />500.42) (See
<br />Skin Irritation ........... Non -Uri
<br />(16 CFR. Ch. lic. Part 1500.41)
<br />O.O.T. Skin Corrosion. Non -Corrosive
<br />(49 CFR, Part 173.240)
<br />PH............................. 1
<br />Flash Point .................... N
<br />Boiling Point ........ 212 degrees F.
<br />Freezing Point ....... 30 degrees F.
<br />Shelf Life ................. IndefI
<br />Penetration ....... Up to five inc
<br />Coverage ........ 15 - 50 bd. ft./ al.
<br />Equipment Pressure ... 35 - 50 psi
<br />Mist At ................... 150+gW
<br />®
<br />YOUR ABATEMENT SOLUTION®•
<br />Manufactured By:
<br />®® NOT REMOVE OR ALTER THIS LABEL
<br />JOWMENMOMMne e
<br />,111111111111h AdIft
<br />05 9 MUM FOR INDUSTRIAL -3716 Scripps way, Las Vegas, Nevada 89103, (7021871-7e.
<br />USE L fu
<br />NOT •PRESOAKING(REMOVE
<br />24 0
<br />If sprayed in non -asbestos environment, use at least.'a least.'
<br />Produft.BWE5000
<br />painters spray mask , Ciassi on: Asbestos Removal
<br />•
<br />Apply at 35-50 psi, lightly mist to break surface tension,,',-,,- ..-Encapsulant
<br />then spray until droplets appear, allow to wick 'in, re at
<br />T�stAnallMs. r
<br />until desired penetration and saturation are achiev
<br />e d index ............... o
<br />•
<br />" '
<br />MOVE away from spray. 00 NOT spray directly overhead.
<br />Fuel ntribution index ........... 0
<br />Smoke Development Index ....... 0
<br />•
<br />REMOVE BWE 5000 treated materials WHILE SMLL -
<br />Fire Rating (AsmEs"Ia)..... ClassA
<br />WET within i to 30 minutes after application, depending-
<br />Toxic Gas Release (ASTM Ee62-79L
<br />type of material beingremoved, or it may harden ' '
<br />Y
<br />(MILon
<br />Mooing om 7239) dk "ora 7138 App In
<br />rq sped 7239)
<br />encapsulated in place.
<br />Chlorine (CI) ................NO
<br />•
<br />FINALCLEAN UP use BWE 5000, wipe Off while still wet.`
<br />Ammonia (NH3) ............. NO
<br />SPRAY BACK/LOCK DOWN lightly mist on only. 1
<br />DOWN, 9 Y Y
<br />Phosgene (COCI) ........... NO
<br />Hydrogen Chloride (HCI) ... NO
<br />AT 150- PSI. USE WIDE-ANGLE TIP.
<br />Hydrogen Cyanide (HCN) ... NO
<br />•
<br />QUICK CLEARANCE: Mist air well and surfaces lightly.
<br />Cain Monoxide (CO),
<br />•
<br />OVERSPRAY: While still wet, clean off with water, or use
<br />Oxidesf Nitrogen (NOx),00059
<br />Easy -Off oven cleaner.
<br />ppm ..................... 1.7
<br />•
<br />For additional information, read material safety data sheet
<br />Hydrogen Fluoride (HF) ..... No
<br />Or CALL BWE.
<br />Oxides of Sulfur (SOx) ...... NO
<br />Formaldehyde (HCHO) ..... ND
<br />PRODUCT WARRANTY
<br />BETTER WORKING ENVIRONMENTS, INC. guarantees their products to be free of
<br />defects. Since the use of, and the application of Better Wonting Environments is
<br />beyond our control, we agree only to replace or refund the purchase price of.any Better
<br />Working Environments product found by our laboratory to be defective. However, we
<br />assume no reaPonsiWNty or liability beyond the purchaw trice of our Products. No other
<br />warranties, express or Implied, are given.
<br />No agent employee, distributor or ottwr naps Illative of Better waking Environ
<br />Inc. has the authority to change or extend this axnd@lon of wee. Therefore. them an no
<br />other warranties, either express or fniplied, whlctn extend beyond that Set forth
<br />NO - None Detected
<br />Corrosiveness
<br />(HUD/FHA UM -80, para 9.8) N
<br />Odor Emission
<br />(HUD/FHA UM -80, para 9.11) Norm
<br />Color (ASTM 01500) ...... Colorbm
<br />Weight per Galion
<br />(ASTM 01298) ........ 10.42
<br />Surface Tension .... 30.7 Dynes/crt
<br />Viscosity. cps (ASTM 0445) ...... 3&C
<br />Specific Gravity ...............:
<br />Total Solids (Gravimetno ..... 29
<br />Solvents (Gas chromotography) ... Wate1
<br />Eye Irritation ................. Irritanl
<br />(16 CFR.CtL 11, Part 1500.42)1:7
<br />500.42) (See
<br />Skin Irritation ........... Non -Uri
<br />(16 CFR. Ch. lic. Part 1500.41)
<br />O.O.T. Skin Corrosion. Non -Corrosive
<br />(49 CFR, Part 173.240)
<br />PH............................. 1
<br />Flash Point .................... N
<br />Boiling Point ........ 212 degrees F.
<br />Freezing Point ....... 30 degrees F.
<br />Shelf Life ................. IndefI
<br />Penetration ....... Up to five inc
<br />Coverage ........ 15 - 50 bd. ft./ al.
<br />Equipment Pressure ... 35 - 50 psi
<br />Mist At ................... 150+gW
<br />®
<br />YOUR ABATEMENT SOLUTION®•
<br />Manufactured By:
<br />®® NOT REMOVE OR ALTER THIS LABEL
<br />JOWMENMOMMne e
<br />,111111111111h AdIft
<br />05 9 MUM FOR INDUSTRIAL -3716 Scripps way, Las Vegas, Nevada 89103, (7021871-7e.
<br />USE L fu
<br />NOT •PRESOAKING(REMOVE
<br />24 0
<br />
|