Laserfiche WebLink
2441 W,Charter Way Page 6 <br /> Work Plan—Soil Boring Installation <br /> GPE Project No.667.2 <br /> June 21,2013 <br /> analysis is undertaken. Sample material selected for laboratory analysis in the field will <br /> be immediately isolated, sealed, labeled, and placed in a cooler chilled to 4 degrees C. <br /> using water ice. <br /> All sampling equipment will be thoroughly cleaned before and between uses. No soil <br /> cuttings will be generated during the Geo-Probe drilling process. In the event that <br /> samples are submitted for laboratory analysis, they will be submitted to a State Certified <br /> analytical laboratory and tested such chemicals as may be suggested by boring log <br /> information. <br /> 2.3 Laboratory Analysis <br /> The soil sampled selected for laboratory analysis will be transported to a State certified <br /> analytic laboratory under chain-of-custody protocol. The analysis will include at a <br /> minimum the following analyses. <br /> • CAM 17 Hazardous metals using EPA method 7000 series, <br /> • Volatile organic chemicals using EPA method 8260b, <br /> • Semi-volatile organic chemicals using EPA method 8270. <br /> 2.4 Waste Disposal <br /> The Geo-Probe soil boring process is direct push method. As such, no solid waste will be <br /> generated. <br /> 2937 Veneman Ave.,#13240 Geo-Phase Environmental Inc. Phone(209)569-0293 <br /> Modesto,CA 95356 Fax(209)569-0295 <br />