ARCHIVED REPORTS_2004 - Laserfiche WebLink

Home Browse Search

B. Topographic Maps: Existing topographic information shown on Construction Drawings is from a 2004 aerial survey. The existing ground surface has been modified in some locations subsequent to the date of the aerial survey. C. Where measurement of quantities depends on elevation of existing ground, elevations obtained during construction, including preconstruction surveys, will be compared with those shown on Construction Drawings. If variations between preconstruction surveys and the 2004 topographic mapping are 1-foot or less, the 2004 topographic information will be used for determining quantities. D. Measurement for payment for furnishing and installing unit price items shall be made by the unit listed on the Bid Form. Quantity shall be calculated on the basis of dimensions shown on the Construction Drawings. Dimensions listed on the Construction Drawings, as a minimum requirement, represent the minimum required for payment. No allowance will be made for items placed outside or in excess of said dimensions, including material placed or removed for Work performed due to survey accuracy and tolerances, equipment accuracy and/or necessary over building, unless otherwise approved in writing by the OWNER. Where volumes for payment are calculated by Drawing dimensions or surveys of actual area covered multiplied by thickness, the thickness used in the calculation shall be the minimum thickness shown on the Construction Drawings. 1.6 PAYMENT A. Ten percent of the Contract Price will be withheld until final completion of the Work. B. Payment for the items specified on the Bid Form shall be by their unit prices quoted. C. Payment for unit price items covers all Work necessary to furnish and install the items and shall include full compensation for providing all labor, materials, equipment, tools, accessories, submittals, and incidentals, and for performing all Work specified including, but not limited to, installing, seaming testing, repairing, protection, and all QA/QC documentation required to complete the Work in accordance with these Specifications and Construction Drawings and as directed by the QA/QC CONSULTANT, DESIGN ENGINEER, or OWNER. D. Separate payment will not be made for items not listed on the Bid Fonn but are necessary to complete the Work. Such items will be considered incidental to the Bid Items listed on the Bid Form. 1.7 NONPAYMENT FOR REJECTED OR UNUSED PRODUCTS A. Payment will not be made for the following: 1. Loading, hauling, disposing or replacement of rejected, contaminated or damaged material or material that does not meet product Specifications listed in the Contract Documents. 2. Quantities of material wasted or disposed of in manner not called for under Contract Documents. 3. Rejected loads of material, including material rejected after it has been placed by reason of failure of CONTRACTOR to conform to provisions of Contract Documents. Forward Landfill WMU FU-04 01200 2 PRICE AND PAYMENT PROCEDURES