Laserfiche WebLink
Sec. 10-1, Construction Details <br /> Std. Spec.Sec 55 <br /> Special <br /> r Page 2 of 2 <br /> F. Well enclosure shall be labeled with the designated well number as shown on the <br /> construction drawings using yellow paint. Labeling shall be by oil based paint with <br /> brush, in a neat and professional manner with lettering a minimum of four (4) <br /> inches in height. <br /> G. Repair paint damaged during construction. <br /> H. Any well enclosure not installed to the satisfaction of the Engineer will be required <br /> to be re-installed at no additional cost to the County. <br /> PART 4 - MEASUREMENT AND PAYMENT <br /> 4.01 MEASUREMENT <br /> Measurement for payment for installing well enclosure shall be per the number <br /> installed. <br /> 4.02 PAYMENT <br /> Payment for each well enclosure shall be per the unit cost quoted in the bid proposal. <br /> ' The unit cost quoted shall include full compensation for furnishing all labor, materials, <br /> tools, equipment, fabricating and painting the well enclosure and its cover, installing <br /> the well enclosure as shown in the construction drawings, placing neat cement inside <br /> the well enclosure, clamping the probe pipe, labeling the probe pipe clamping location, <br /> labeling the well enclosure with designated well number, and for doing all the work <br /> completely, as shown on the construction drawings and specified herein. <br /> ' END OF SECTION <br /> NA2Periml-FGwells 08\Specs\Sect 55-S Well Enclosure.doc <br />