Laserfiche WebLink
with the test results. The HDPE geomembrane used for shear <br />strength testing shall be the same one that will be shipped to the <br />site for construction of the lining system. <br />7) The testing laboratory shall report the interface where <br />deformations are observed for each test. Also submit 4"x4" tested <br />geomembrane sample with the test results to the OWNER'S <br />representative. The lot and roll number of the geomembrane <br />should also be reported. <br />A. Meeting the geomembrane manufacturer requirements. <br />B. Made from same resin as the geomembrane. <br />C. Thoroughly disperse additives throughout rod or bead. <br />D. Containing 2 to 3 percent carbon black. <br />E. Free of contamination by moisture or foreign matter. <br />A. Supply seam welding accessories meeting the following requirements: <br />1. Maintain sufficient operational seaming apparatus to continue work without <br />delay. <br />2. Use power source capable of providing constant voltage under combined line <br />load. <br />3. Provide protective lining and splash pad large enough to catch spilled fuel <br />under electric generator, if located on liner. <br />4. Tensiometers capable of measuring seam strength, calibrated and accurate <br />within 2 pounds. <br />S. Dies for cutting seam samples in first class condition. <br />2.6 MANUFACTURER SOURCE QUALITY CONTROL <br />A. Perform the following quality control tests at the manufacturing plant or other <br />laboratories on geomembrane products: <br />Forward Landfill WMU FU -06 HIGH DENSITY POLYETHYLENE <br />02778 10 (HDPE) GEOMEMBRANE <br />