Laserfiche WebLink
E. Extrudate: The molten polymer that is emitted from an extruder during seaming <br /> using either extrusion fillet or extrusion flat methods. The polymer is initially in the <br /> form of a ribbon rod, bead or pellets. <br /> F. Fabricator: The party responsible for the fabrication of geomembrane panels <br /> constructed from rolls received from the manufacturer. <br /> G. Geomembrane Manufacturer: The party responsible for the production of the <br /> geomembrane rolls from resin and for the quality control of the resin. <br /> H. Geomembrane: An essentially impermeable membrane used as a solid or liquid <br /> barrier. Synonymous term for flexible membrane liner(FML). <br /> I. Geomembrane Subsurface: The soil or geosynthetic surface on which the <br /> geomembrane lies. <br /> J. GEOSYNTHETICS CONTRACTOR: The party responsible for field handling, <br /> transporting,storing,deploying,seaming,temporarily restraining(against wind),and <br /> installing the geomembrane. <br /> K. Panel: The unit area of geomembrane that will be seamed in the field. If the <br /> geomembrane is not fabricated into panels in a factory,a panel is identified as a roll <br /> or portion of a roll without any seams. <br /> 1.4 SUBMITTALS <br /> A. Product Data: Submit the following to the QA/QC CONSULTANT. <br /> 1. Resin Data. <br /> a. Statement of production date or dates. <br /> b. Certification stating that the resin meets the product requirements(see <br /> Paragraph 2.2). <br /> C. Certification stating that all resin used in the production of the <br /> geomembrane are of the same type, and that reclaimed polymer is <br /> limited to 10 percent reworked material. <br /> d. Copy of quality control certificates issued by manufacturer. <br /> e. Test reports from manufacturer. <br /> 2. Geomembrane Rolls. <br /> a. Statement of production date or dates,and manufacturers certificates <br /> for each day's production. <br /> b. Laboratory test results and certification stating that the geomembrane <br /> meets the product requirements of Part 2. <br /> C. Certification stating that all geomembrane rolls are furnished by one <br /> supplier, and that all rolls are manufactured from one resin type <br /> obtained from one resin supplier. <br /> d. Copy of quality control certificates issued by manufacturer and <br /> including designation of test methods used. Also include roll <br /> numbers,batch numbers, lot numbers, and roll identification. <br /> e. Test reports from the manufacturer. <br /> f. Typical results of complete notched constant tensile load test for <br /> Forward Landfill WMU FU-14 HIGH DENSITY POLYETHYLENE <br /> 02778 3 (HDPE) GEOMEMBRANE <br />