ARCHIVED REPORTS_2006_2 - Laserfiche WebLink

Home Browse Search

B. Prior to starting work, the Contractor shall submit to the Engineer for approval, six sets of shop drawings of motor controls, panel boards, control panels and all other electrical equipment. 1.03 UL COMPLIANCE A. Materials manufactured within scope of Underwriters Laboratories, including the control panel, shall conform to UL Standards and have an applied UL listing mark. 1.04 SUMMARY OF WORK A. The Contractor shall provide complete electrical wiring and installation as identified herein, and as needed for a complete installation. As such, this section provides minimal criteria for the purchase and installation of electrical components, and the installation practices to be utilized by the Contractor. It is not the intent of this section to dictate to the Contractor, the use of any specific brand name electrical component as a part of the complete installation. B. Electrical work and equipment shall be constructed in accordance with the National Electrical Code for the area classifications given herein. C. The Contractor shall provide labor and materials as required to complete the work of this Section in accordance with the requirements of governmental agencies having jurisdiction, and all pertinent codes and regulations. D. Motor -starter, lighting and all work shall be accomplished in accordance with all applicable City, County, and local codes, and the National Electrical Code and its latest revisions and with all pertinent requirements and standard specifications of the local power company. E. Control panel assemblies shall be wired and tested in accordance with UL or another inspection agency recognized by the State of California. All panel assemblies shall be provided with a UL stamp of approval plainly visible for inspection. F. Electrical equipment (motors, valves, instruments, thermocouples) shall be wired complete and in accordance with the manufacturer's wiring diagrams and instructions. G. The area as shown on the drawings shall be classified as hazardous Class 1, Division 2, Group D. All areas below grade are classified as Class 1, Division 2, Group D. H. Electrical enclosures which house arcing components are to be installed outside the Class 1, Division 2, Group D areas. Components which enclose arcing components installed within the Class 1, Division 2, Group D areas must be rated for these areas. I. Contractor shall provide and install all conduits, cable and connections between flare panels, and electrical components mounted on the same flare skid assembly. North County LFG Collection System 2 FLARE STATION ELECTRICAL San Joaquin County Public Works Section 16005