ARCHIVED REPORTS_2006_2 - Laserfiche WebLink

Home Browse Search

J J. Contractor shall provide and install empty conduits with j -boxes attached at the flare Skid's edge, to facilitate field connections between electrical components mounted off the flare skid assembly and flare panels. Note: This does not included electrical service, telephone, lights and receptacles which are to be installed by others. outlets and area lighting. The Contractor shall provide a 15A NEMA 4 switch on the front of the control panel to operate area lighting. N. The Contractor shall provide two 15 amp I IOV GFI duplex outlets for the owner's use on the control panel. PART 2 MATERIALS 2.01 GENERAL A. Products shall comply with all applicable provisions of NEPA 70. B. Like Items of Equipment: Use products from one manufacturer in order to achieve standardization for appearance, operation, maintenance, spare parts, and manufacturer's service. C. Equipment and Devices Installed Outdoors or in Unheated Enclosures: Capable of continuous operation within ambient temperature range of 0 degrees F to 140 degrees F. D. Hazardous Areas: Products shall be acceptable to the regulatory authority having jurisdiction for the class, division, and group of hazardous area identified in this section. E. Equipment Finish: 1. All electrical equipment will be painted gray or white. 2.02 ELECTRICAL SERVICE A. Incoming electrical service for the operation of the system will be 480 -volt, three- phase, four -wire. Provide all necessary disconnects, main and feeder breakers and junction boxes as a means of interfacing with the incoming electrical service. North County LFG Collection System 3 FLARE STATION ELECTRICAL San Joaquin County Public Works Section 16005 K. Contractor shall provide drawings identifying location and size of empty conduits with j -boxes attached at the flare skid's edge, in order to facilitate field connections between electrical components mounted off the flare skid assembly and flare panels. L. Contractor shall provide control and connection drawings identifying wire type and count required between flare panels and electrical components mounted off the flare skid assembly which are an integral part of the final installation. M. The Contractor shall provide 10 KVA 120/240 V single phase power for electrical outlets and area lighting. The Contractor shall provide a 15A NEMA 4 switch on the front of the control panel to operate area lighting. N. The Contractor shall provide two 15 amp I IOV GFI duplex outlets for the owner's use on the control panel. PART 2 MATERIALS 2.01 GENERAL A. Products shall comply with all applicable provisions of NEPA 70. B. Like Items of Equipment: Use products from one manufacturer in order to achieve standardization for appearance, operation, maintenance, spare parts, and manufacturer's service. C. Equipment and Devices Installed Outdoors or in Unheated Enclosures: Capable of continuous operation within ambient temperature range of 0 degrees F to 140 degrees F. D. Hazardous Areas: Products shall be acceptable to the regulatory authority having jurisdiction for the class, division, and group of hazardous area identified in this section. E. Equipment Finish: 1. All electrical equipment will be painted gray or white. 2.02 ELECTRICAL SERVICE A. Incoming electrical service for the operation of the system will be 480 -volt, three- phase, four -wire. Provide all necessary disconnects, main and feeder breakers and junction boxes as a means of interfacing with the incoming electrical service. North County LFG Collection System 3 FLARE STATION ELECTRICAL San Joaquin County Public Works Section 16005