Laserfiche WebLink
n <br />0 <br />�7 <br />• Interfere substantially with ground water recharge. <br />• Degrade the quality of water in artificial water -carrying structures. <br />Cause siltation from erosion. <br />The analysis of potential effects includes consideration of mitigation measures for compliance with water <br />pollution control, spill control and reclamation measures. <br />Impact <br />4.5-1 Surface water contamination may occur from discharge of surface waters or storm water <br />which has become contaminated. <br />During project development, surface water quality may be affected by runoff from grading <br />activities during construction. Grading activities uncover and loosen soils, allowing silts and clays <br />to be readily carried by runoff waters and deposited elsewhere. <br />Impact to surface water may occur as a result of contamination of runoff from paved areas used <br />for truck access. Contaminants in runoff from paved areas would be petroleum hydrocarbons, <br />oil, grease, antifreeze and solids (including heavy metals). <br />Potential sources for storm water contamination on the site include roads and parking areas <br />where storm runoff may contact automotive pollutants such as oil, grease, heavy metals, and <br />suspended solids: recycling, storage, and any other processing areas where storm runoff may <br />contact refuse, recycled, or other recoverable materials; and truck wash and maintenance areas <br />where rinse water, equipment fuels, and lubricants could mingle with storm runoff. Additional <br />contaminants may result from the "collection vehicle maintenance and operations facility for the <br />Tracy Disposal Solid Waste Management, Inc. (TDSWM) to be included as part of the project" <br />as described in the "Project Description for Tracy Materials Recovery and Transfer Facility, Inc., <br />San Joaquin County" (EBA, 1993). <br />As the facility is to be sited within a pit, there is no point at which surface water flows can leave <br />the site. <br />Storm water may be discharged to waters of the State United States under the terms of as <br />indi istrial Storm Water Permit - inder the St= Geperal Permit the California General Storm Water <br />Permit. If storm water becomes contaminated with any process water from the site, including <br />wash water from the tipping floor or truck wash, an NPDES Permit will be required for any <br />discharge to off site water courses. Both permits require regular testing of the retention/drainage <br />pond, to ensure that storm water discharged to the pond does not contain contaminants. All <br />mitigation measures required by the NPDES and the State General Permit will be implemented. <br />Any storm water discharge during the construction phase must comply with the requirements of <br />the RIA10CR California General Storm Water Permit and local ordinance. Storm runoff from any <br />other surface areas during the operation of the proposed project should be discharged in <br />compliance with the State General Industrial Storm Water Permit. <br />■ <br />Mitigation <br />4.5-1 During construction, runoff from disturbed areas should be routed to on-site sedimentation ponds <br />and detained, allowing suspended sediment to settle out as described in the California General <br />Storm Water Permit. <br />Off site storm water and sheet flow runoff should be intercepted and prevented from flowing onto <br />the site, by diversion around the site perimeter. <br />ER -93-1 -68- (9-27-93) <br />