Laserfiche WebLink
rr'1 <br />LJ <br />Construction & Demolition/Inert Debris Facility Report <br />Tracy Material Recovery and Transfer Facility <br />30703 S. MaMrthur Drive, Tracy, California 95377 <br />Table 4 - Inert (Type A) Inert Processing Design Capacity <br />Machinery/ <br />Machinery <br />Permit <br />Ave. <br />Max. <br />Rate <br />Production <br />Gate <br />Production <br />Design <br />16 <br />Rate <br />Tonnage <br />Hours/Day <br />Capacity <br />Portable HSI Lippeman <br />Mixed C&D <br />up to <br />16 <br />480 TPD <br />Milwaukee Jaw Plant, <br />250 <br />200 <br />8 <br />3,000 <br />3- deck Cedar Rapid <br />Tons/Hour <br />Tons/Day <br />Hours/Day <br />Tons/Day <br />screen, electric (or <br />400 TPD proposed <br />Tons/Day <br />Hours/Day <br />Tons/Day <br />similar <br />The facility is proposed to receive up to 400 TPD of mixed C&D debris. Mixed <br />C&D debris varies in consistency. Tracy MRF & TS plans to recycle the inerts, <br />wood, metal, cardboard, plastics, carpet padding, carpet, dry -wall, and C&D fines <br />with the rest considered as residual, for a minimum 60% recycling rate. On a <br />typical peak day, the facility would be able to process 100 TPD of wood, 100 <br />TPD of metal, 65 TPD of inerts, 30 TPD of cardboard, 20 TPD of plastics, 5 TPD <br />of carpet and padding, 10 TPD of dry -wall, 70 TPD of MRF fines and 100 TPD of <br />residual (as the estimated composition of materials, or a combination thereof). As <br />Table 5 demonstrates below, the design processing capacity is capable of <br />handling in excess of the planned 400 TPD capacity over the 12 hour work day. <br />When mixed loads have a variable CD debris consistency, the CD Processing <br />Facility has adequate design capacity to process the debris. <br />C&D Processing <br />Production <br />Production <br />Max. <br />method <br />Rate <br />Hours/Day <br />Design Capacity <br />C&D Debris Pre- <br />15 Tons/Hour <br />16 <br />240 TPD <br />Sort Load Out <br />/Day <br />hours/da <br />Inert Crushing <br />Mixed C&D <br />30 Tons/Hour <br />16 <br />480 TPD <br />Processing Line <br />Tons/Hour <br />hours/da <br />Hours/Da <br />Total <br />45 Tons/Hour <br />16 <br />720 TPD design <br />1.67 <br />720 <br />hours/day <br />400 TPD proposed <br />Table 6 — Material Processing Design Capacity <br />Machinery <br />Machinery <br />Average <br />Ave. <br />Max. <br />Production <br />Gate <br />Production <br />Design <br />Rate <br />Tonnage <br />/Day <br />Capacity <br />Inert Crushing <br />250 <br />80 <br />.32 <br />3,000 <br />Tons/Hour <br />Tons/Day <br />Hours/Da <br />Tons/Da <br />Residual Load -out <br />60 <br />100 <br />1.67 <br />720 <br />Tons/Hour <br />Tons/Day <br />Hours/Day <br />Tons/Day <br />7 170.18 CDI FacReport 050813 revised <br />