Laserfiche WebLink
n <br />Construction & Demolition/Inert Debris Facility Report <br />Tracy Materia/ Recovery and Transfer Facility <br />30703 S. MacArthur Drive, Tracy, California 95377 <br />Machinery <br />Machinery <br />Average <br />Ave. <br />Max. <br />Production <br />Gate <br />Production <br />Design <br />Rate <br />Tonnage <br />Day <br />Capacity <br />MRF Fines Load- <br />60 <br />70 <br />1.17 <br />720 <br />out <br />Tons/Hour <br />Tons/Da <br />Hours/Da <br />Tons/Da <br />Metal Load -out <br />20 <br />100 <br />5 <br />5 <br />Tons/Load <br />Tons/da <br />loads/da <br />loads/da <br />Cardboard Load- <br />3 <br />30 <br />10 <br />24 <br />out <br />Tons/Bin <br />Tons/da <br />bins/da <br />bins/da <br />Dry -Wall Load -out <br />3 <br />30 <br />10 <br />24 <br />Tons/Bin <br />Tons/da <br />bins/da <br />bins/da <br />Plastic Load -out <br />2 <br />20 <br />10 <br />24 <br />Tons/Bin <br />Tons/da <br />bins/da <br />bins/da <br />Assumptions and Calculations <br />Locations of all aspects of operations, including loading and unloading (tipping) <br />areas, have been designed to facilitate the safe ingress and egress of equipment <br />and vehicles, and minimize potential hazards to drivers and onsite personnel. All- <br />weather surfaces are maintained throughout the facility, including loading and <br />unloading areas, and allow a minimum of 120 feet for maneuvering of solid waste <br />vehicles (i.e. making a right-hand turn and backing straight up), as described in <br />H. Lanier Hickman's Complete Handbook of Solid Waste Collection and Transfer. <br />Pile heights have been limited to 25 feet for inerts and 20 feet for C&D debris to <br />more readily manage materials, facilitate safe handling of materials with onsite <br />equipment, and minimize risk to public, drivers and onsite personnel. Site <br />personnel will monitor and maintain pile construction to prevent potential hazards <br />due to unstable or poorly configured piles. <br />The facility is surrounded by 25 -foot perimeter access areas and 20 -foot roads or <br />spaces are maintained between all material or debris piles, to enable access to <br />all operations areas by onsite equipment for materials management, or fire <br />control vehicles and equipment, if necessary. <br />All storage volumes have been calculated utilizing the following assumptions: <br />• Inert materials have an average of one ton per cubic yard. <br />• Mixed C&D materials have an average weight of 500 lbs. per cubic yard <br />Cubic Yards= Tons X 2000 lbs./ton X 1 cubic yard/500 lbs. <br />• Stockpile volumes are derived using a common mathematical formula: <br />Cubic Yards = 1/ (Area of Base (sq. ft.) 0 x w) + Area of Top (sq. ft.) (I x w)) X Height in ft. <br />27 cu. ft./cu. yd. <br />8 170.18 CDI FacReport 050813 revised <br />