PR0535342 - Laserfiche WebLink

Home Browse Search

:. IMTIAL START 7 1. Before turning on the XRF make sure the battery and the probe are properly connected. a. Use a screwdriver to open the back panel and make sure the battery is connected to the instrument. b. Connect the end of the probe cable to the XRF and the straight end to the probe. 2. Turn on the XRF and allow the probe to waffi up-fOr 151 mf'nutes* 3. Check the date and time and correct them if necessary. Use the "Cont/Pause" button to enter your corrections or for informational input. 4. While you wait, activate the auto store option, select an application and disable the display thresholds. a. Activate thn•.auto store-optiorrby pressing the #5 kev rrom the main menu to snow the "other functions menu" . Then select option #3 to set the store/send operation. Press the NONE key to reset all PRINT options to OFF. Choose the STORE option and use the UP/DOWN/MOD keys to set both Results and Spectra to ON. Press "Done," th "Disable" to return to ATL menu. arr15 �, to re J4.-, O C*N' ?- J140- b. lCh s `A ari tic by- seiecting .lWy #2 from the mai k menu. The "Soils with J, Th, Ag" application is for analysis of soils where the balance of the sample is directly measured by the instrument (use this option basic analysis) . The "Thin Soils" application is fox analysis of thin films such as air monitoring filter= wipes. c. able the DISPLAY THRESHOLDS 'bv selecting �L URE from the main menu. Then select' 1 OPTIONS followed by MORE OPTIONS. On the screen look at option #5. It should read "inable display thresholds" . If not press key #5. ti. ,. by pass,^' key 001 you aAe- II. OPERATIONS CHECK (AFTER 15 MINUTE WARM UP) 1. An Efier`-`==ib'ratfort should be performed evaxy.itiXe--tM i1M=M=nt _iS7naved lErom one location to another. To perform an Energy Calibration, place the lead probe cover (a flat plate that covers the whole probe) over the probe choose MEASURE from the main menu. Then select more options. Choose the ENERGY CALIBRATION option. 1 'ecvclec caner