Laserfiche WebLink
Sock Instructions Page 3 of 8 <br /> ORC REMOVAL <br /> + ORC Socks will be approximately 20% heavier after water <br /> saturation <br /> +� Static friction from screened casing may cause difficulty in <br /> removal <br /> +� A winch and stanchion (or comparable equipment) may be <br /> necessary to help remove the socks due to increased weight, <br /> friction, etc. <br /> 4 INCH AND G INCH LACING DIAGRAM <br /> CENTER ►. Find the center of the rope. <br /> OF ROPE Begin lacing the ORC Socks <br /> by threading the two ends of <br /> .- the installation rope through <br /> aLACK the black grommets and then <br /> GROMMETS through the white grommets <br /> at the bottom of the same <br /> i' WHFTE <br /> GROMMETS side of the bottom sock <br /> BLACK 2. Pull the rope through the <br /> GROMMETS pe� P g <br /> bottom sock, making sure <br /> the center of the rope is <br /> WHITE between the black <br /> GROMMETS <br /> r <br /> grommets. Cross the ropes <br /> . . . over each other. <br /> L <br /> CENTER <br /> http://www.regenesis.com/ORC/Instructions/SockIiistrLiCtiOns.IItm 2/27/01 <br />